Skip to main content
CityRuleLookup

Brevard County, FL Fence Regulations: Material Restrictions (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified August 2026

Key Facts

Allowed materials
Treated wood, non-corrodible metal wire, iron, PVC
Barbed/razor wire
Prohibited on residential fences
Wire fabric gauge
12½-gauge galvanized minimum
Applies to
Unincorporated Brevard only
Permit fee
$34.00 (Sec. 22-709)

Summary

Unincorporated Brevard limits fences to wood, non-corrodible metal wire, ornamental iron, or PVC, and bans barbed and razor wire on residential fencing.

City-specific rules exist: Titusville, Cocoa, Melbourne, and Palm Bay have their own material restrictions rules that differ from Brevard County's county-level regulations. If you live in one of those cities, check the city-specific page instead.

Fences constructed within the unincorporated area of the county shall conform to one or any combination of the following: (1)Wood fences constructed of rot and termite resistive species of wood...(2)Posts of pressure treated wood or non-corrodible metal and wire fences...(3)Ornamental iron.(4)PVC material. ... The utilization or installation of barbed tape, razor tape and/or razor wire and concertina barbed wire for fencing, partitions or obstacles is prohibited for residential fencing.

Source: Brevard County Code of Ordinances (Municode)View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 135).

Full Breakdown

Brevard County Code § 22-703 caps residential fence construction to four material types: rot/termite-resistant or chemically treated wood (finished side facing out), pressure-treated wood posts with 12½-gauge galvanized or non-corrodible wire fabric, ornamental iron, or PVC. Section 22-704 separately bans barbed tape, razor tape, razor wire, and concertina barbed wire for any residential fencing, partition, or obstacle. Both rules apply only in unincorporated Brevard, not inside Cocoa, Titusville, Melbourne, Palm Bay, or the county's other incorporated cities, which enforce their own fence codes.

Violations & Fines

Building unpermitted or off-spec materials, including barbed/razor wire on a residential fence, is enforceable by the county building official; a construction permit is required for new fences and major repairs (Sec. 22-705).

Frequently Asked Questions

Can I put barbed wire on my residential fence in unincorporated Brevard County?
No. County Code § 22-704 prohibits barbed tape, razor tape, razor wire, and concertina barbed wire on residential fencing, partitions, or obstacles.
What fence materials does Brevard County allow?
Section 22-703 permits treated wood, non-corrodible metal or 12½-gauge galvanized wire fencing, ornamental iron, or PVC: no other materials are listed as conforming.
Does this rule apply inside Melbourne or Titusville?
No. This is the unincorporated county code; incorporated Space Coast cities like Melbourne, Titusville, and Cocoa have their own separate fence ordinances.

Sources & Official References

Other rules in Brevard County

All Brevard County rules

Florida rules heatmap·Compare Brevard County to another location·View the Florida fence regulations overview

Get notified when Material Restrictions in Brevard County, FL changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Material Restrictions in Cities Across Brevard County