Skip to main content
CityRuleLookup

Kern County, CA Fence Regulations: Fence Permit Requirements (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified June 2026

Key Facts

Permit exemption
Fences <= 7 feet high (CBC 105.2 as adopted)
Permit required
Fences > 7 feet, retaining walls, pool barriers
Issuing agency
Kern County Public Works - Building Inspection Division
Plan review timeline
10 to 30 days typical
Zoning compliance
Required even if no building permit needed

Summary

Per the California Building Code as adopted in Kern County Title 17, fences not over 7 feet high are exempt from building permits. Fences exceeding 7 feet, masonry retaining walls, and pool-enclosure barriers require a permit from the Kern County Public Works Building Inspection Division.

City-specific rules exist: Ridgecrest has its own fence permit requirements rules that differ from Kern County's county-level regulations. If you live in Ridgecrest, check the city-specific page instead.

A building permit shall not be required for the following: ... Fences not over 7 feet (2134 mm) high. (California Building Code Section 105.2, as adopted by reference in Kern County Code Title 17 Chapter 17.08.)

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 59 Update 1).

Full Breakdown

Kern County has adopted the California Building Code in Title 17 (Building Code). Under CBC Section 105.2 as adopted by reference, building permits are not required for 'Fences not over 7 feet (2134 mm) high.' Even when a building permit is not required, the fence must still comply with Title 19 zoning provisions (§ 19.08.210 height/material limits). Fences over 7 feet, masonry walls subject to lateral pressure, and pool barriers under Chapter 13.12 (Swimming Pools and Other Bodies of Water. Barriers and Warning Signs) require permits. Permits are issued by the Kern County Public Works Department, Building Inspection Division. Plan review typically takes 10-30 days depending on project complexity.

Violations & Fines

Building without a required permit triggers double-fee penalty assessments under the Building Code, plus possible stop-work orders. A Title 19 zoning violation (height/material) is a misdemeanor under Chapter 19.114 carrying up to $1,000 fine and/or 6 months jail per day of continuing violation.

Frequently Asked Questions

Do I need a permit for a typical 6-foot backyard fence in unincorporated Kern County?
No building permit is required because the fence is 7 feet or less. However, the fence must still comply with Title 19 zoning rules: 6 ft max in side/rear yards in residential zones, 4 ft max in front yards.
What if I want a fence taller than 7 feet?
You will need a building permit from Kern County Public Works Building Inspection, AND a discretionary planning permit because § 19.08.210 caps standard residential fence heights at 4-6 feet without director or commission approval.
Where do I apply for a fence permit in Kern County?
Kern County Public Works Building Inspection Division handles building permits for unincorporated areas. Visit kernpublicworks.com or the county service center. Cities within Kern County (Bakersfield, Delano, etc.) issue their own permits separately.

Sources & Official References

Other rules in Kern County

All Kern County rules

California rules heatmap·Compare Kern County to another location·View the California fence regulations overview

Get notified when Fence Permit Requirements in Kern County, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Fence Permit Requirements in Cities Across Kern County