Washington County, OR Fire Regulations: Brush Clearance (2026)
Key Facts
- Primary fuel-free break
- 30 feet minimum around structure
- Secondary fuel-free break
- additional 100 feet
- Break widens with slope
- up to +150 ft added zone at 40% slope
- Break must be on
- land owner controls, not neighbor's land
- Companion standards
- fire-retardant roof, spark arrester on chimney
Summary
Owners of dwellings and structures in the EFC forest zone must maintain a 30-foot fuel-free primary fire break around the building, plus an additional 100-foot fuel-free secondary break, with the primary break widening further on steeper slopes under a county dimensional table.
D. Fire Break Area Requirements. The owner(s) of dwellings and structures, including replacement dwellings and accessory structures, shall: (1) Maintain a minimum 30-foot primary fuel-free fire break area around the dwelling or structure. As slopes increase, the distance of the primary fire break area shall be increased around the dwelling or structure in accordance with the dimensional requirements in Table A; (2) Maintain an additional 100-foot secondary fuel-free fire break area around the primary firebreak encircling the dwelling or structure; and (3) Any required fire break shall be on land that is owned or controlled by the owner of the subject property.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Community Development Code: Supplement 2 | Code of Ordinances: Supplement 25).
Full Breakdown
D requires owners of dwellings and structures, including replacement dwellings and accessory structures in the EFC District, to maintain a minimum 30-foot primary fuel-free fire break area around the building. That distance is not fixed: Table A increases the primary safety zone's additional buffer as slope rises, adding a 50-foot additional safety zone at 10% slope, 75 feet at 20% slope, 100 feet at 25% slope, and 150 feet at 40% slope, on top of the base 30-foot primary zone. Owners must also maintain an additional 100-foot secondary fuel-free fire break encircling the primary break.
Any required fire break must sit on land the property owner owns or controls, meaning a firebreak cannot be maintained on a neighbor's parcel. B must meet these same fire break requirements to the extent the existing building setbacks allow. The fuel-free break requirement pairs with related structural standards in the same section: structures cannot be sited on a slope greater than 40%, must have a fire-retardant roof, and any chimney must carry a spark arrester. 5 separately requires roads and driveways serving these structures to be built and maintained to standards approved by the local fire protection agency, with written confirmation required before both preliminary and final building inspection.
Violations & Fines
Failure to maintain the required 30-foot primary and 100-foot secondary fuel-free fire breaks is a standard the county checks at building permit review under Section 428-3.4.D; a permit will be denied or conditioned where an existing violation is on file per Section 215-2, and violations are prosecuted under Chapter 1.14 of the Washington County Code per Section 215-3.
Frequently Asked Questions
How large a fuel-free zone do I need around my house in the EFC zone?
Can my fire break extend onto my neighbor's land?
Does slope change how much brush I have to clear?
Sources & Official References
Other rules in Washington County
Compare Washington County to another location·View the Oregon fire regulations overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.