Skip to main content
CityRuleLookup

Santa Cruz County, CA Fire Regulations: Wildfire Zones (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Hazard mapping
Most unincorporated land High/Very High FHSZ
Very-high areas
Includes Boulder Creek, Freedom Blvd corridor
CZU fire (2020)
86,509 acres, ~1,490 structures, 1 death
WUI building code
CBC Ch. 7A / CRC R337; SCC 12.10.215(D), 12.10.220(H)
Defensible space
100 ft required (PRC 4291)

Summary

Most of unincorporated Santa Cruz County is mapped High or Very High Fire Hazard Severity Zone, with extensive Wildland-Urban Interface. The 2020 CZU Lightning Complex burned 86,509 acres and destroyed about 1,490 structures. WUI building standards and 100-foot defensible space apply.

City-specific rules exist: Santa Cruz has its own wildfire zones rules that differ from Santa Cruz County's county-level regulations. If you live in Santa Cruz, check the city-specific page instead.

Fire Hazard Severity Zones The Fire Hazard Severity Zone (FHSZ) maps are developed using a science-based and field-tested model that assigns a hazard score based on the factors that influence fire likelihood and fire behavior. Many factors are considered such as fire history, existing and potential fuel (natural vegetation), predicted flame length, blowing embers, terrain, and typical fire weather for the area. There are three levels of hazard in the State Responsibility Areas: moderate, high, and very high. Fire Hazard Severity Zone maps evaluate "hazard," not "risk". They are like flood zone maps, where lands are described in terms of the probability level of a particular area being inundated by floodwaters, and not specifically prescriptive of impacts.

Full Breakdown

Santa Cruz County is one of California's most wildfire-exposed counties, with a very large share of its area in the Wildland-Urban Interface and the great majority of unincorporated land mapped as High or Very High Fire Hazard Severity Zone (FHSZ). The state Office of the State Fire Marshal (OSFM) and CAL FIRE adopted updated FHSZ maps in 2024-2025; in Santa Cruz County, very-high-hazard areas include parts of Boulder Creek and along Freedom Boulevard, with high hazard across much of the unincorporated county and moderate hazard near communities such as Felton, Ben Lomond, and Soquel.

The danger is not theoretical: the August 2020 CZU Lightning Complex burned 86,509 acres across Santa Cruz and San Mateo counties, destroyed roughly 1,490 structures, caused one death, and forced large evacuations before containment on September 22, 2020. 220(H)) on new structures, additions, and exterior alterations. Owners must also maintain 100 feet of defensible space under Public Resources Code 4291. Buyers in these zones receive natural-hazard disclosures.

Violations & Fines

Building or altering structures in mapped FHSZ/WUI areas without ignition-resistant (Chapter 7A / R337) construction, or failing to maintain required defensible space, violates county building standards and PRC 4291. Non-compliant defensible space can trigger citations and abatement.

Frequently Asked Questions

Is my unincorporated Santa Cruz County property in a fire hazard zone?
Very likely. Most unincorporated county land is mapped High or Very High Fire Hazard Severity Zone, with very-high areas near Boulder Creek and Freedom Boulevard. Check the OSFM/CAL FIRE maps and the county's Fire Resources page for your parcel's current designation.
What special building rules apply in the fire-hazard zones?
New structures, additions, and exterior alterations in SRA fire-hazard zones and LRA Very High zones must use ignition-resistant Wildland-Urban Interface construction under California Building Code Chapter 7A / Residential Code R337, with Santa Cruz County amendments, plus 100 feet of defensible space.

Sources & Official References

Other rules in Santa Cruz County

All Santa Cruz County rules

California rules heatmap·Compare Santa Cruz County to another location·View the California fire regulations overview

Get notified when Wildfire Zones in Santa Cruz County, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Wildfire Zones in Cities Across Santa Cruz County