Skip to main content
CityRuleLookup

Kitsap County, WA Noise Ordinances: Decibel Limits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Governing section
KCC § 10.28.040, Maximum permissible noise levels
Class A limit
55/57/60 dBA reaching Class A/B/C property
Class B limit
57/60/65 dBA reaching Class A/B/C property
Class C limit
60/65/70 dBA reaching Class A/B/C property
Short spikes allowed
Up to 15 dBA over for 1.5 minutes per hour
Coverage
Unincorporated Kitsap County only
Penalty
Misdemeanor: up to 90 days jail or $250 fine

Summary

Kitsap County Code § 10.28.040 sets numeric decibel ceilings by Environmental Designation for Noise Abatement (EDNA) zone class: a Class A noise source may not exceed 55 dBA at a Class A receiving property, 57 dBA at Class B and 60 dBA at Class C, with higher ceilings for Class B and C sources. Short, occasional spikes above the table are allowed.

These county ordinances apply to unincorporated areas of Kitsap County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

(a) The noise limitations established are as set forth in the following table after any applicable adjustments provided for herein are applied: EDNA OF NOISE SOURCE, EDNA OF RECEIVING PROPERTY: Class A, Class B, Class C. Class A: 55 dBA, 57 dBA, 60 dBA. Class B: 57, 60, 65. Class C: 60, 65, 70. (c) At any hour of the day or night, the applicable noise limitations in subsections (a) and (b) of this section may be exceeded for any receiving property by no more than: (1) 5 dBA for a total of fifteen minutes in any one-hour period; or (2) 10 dBA for a total of five minutes in any one-hour period; or (3) 15 dBA for a total of 1.5 minutes in any one-hour period.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4864424; v0 updated 2025-12-08; through 12-08-2025).

Full Breakdown

28, Noise Control, first adopted by Ordinance 3-A in 1975. 030: Class A covers single-family and multi-family residential zones, the residential mobile home zone, the agricultural zone, the forestry zone and the undeveloped land zone; Class B covers the business neighborhood, business general, commercial and light manufacturing zones; Class C covers the manufacturing zone. Subsection (a)'s table sets the ceiling by pairing the EDNA of the noise source against the EDNA of the receiving property: a Class A source is capped at 55 dBA reaching a Class A property, 57 dBA reaching Class B, and 60 dBA reaching Class C; a Class B source is capped at 57, 60 and 65 dBA respectively; a Class C source at 60, 65 and 70 dBA. 5 minutes. 030. 4-1971, per the chapter's definitions.

Violations & Fines

A first violation of § 10.28.040 is a misdemeanor under § 10.28.150, punishable by up to ninety days in the county jail, a fine of up to $250, or both, with each day of continuing violation charged as a separate offense; the county may instead pursue it as a Class I civil infraction under Chapter 2.116, or seek nuisance abatement and injunction in Superior Court under § 10.28.140.

Frequently Asked Questions

How loud can a Kitsap County neighbor's noise be at my house?
It is capped by both properties' EDNA class under § 10.28.040. A Class A source, most homes, is capped at 55 dBA reaching another Class A property; a Class B commercial source is capped at 57 dBA reaching a Class A property; a Class C industrial source is capped at 60 dBA. Short spikes up to 15 dBA over are allowed for 1.5 minutes an hour.
Does Kitsap County's decibel table apply inside Bremerton or Poulsbo?
No. § 10.28.040 sits in the county's own Chapter 10.28 and only reaches the unincorporated area of Kitsap County. Bremerton, Port Orchard, Poulsbo and Bainbridge Island enforce their own municipal noise codes, so a complaint about a source or receiving property inside any of those cities goes to that city, not the county sheriff's office.
Do I need a sound meter reading to report a noise violation?
For the numeric § 10.28.040 limits, an accurate reading from a sound level meter is how the county proves the dBA level was exceeded, and the meter must meet Type 1 or Type 2 accuracy under ANSI S1.4-1971. A separate public disturbance complaint under § 10.28.145 does not require a meter reading.

Sources & Official References

Other rules in Kitsap County

All Kitsap County rules

Compare Kitsap County to another location·View the Washington noise ordinances overview

Get notified when Decibel Limits in Kitsap County, WA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.