Peoria County, IL Building Safety: Electrical Permits (2026)
Key Facts
- Adopted code (§ 12-22)
- NFPA 70 National Electrical Code, 2017 Edition
- Conflicting cross-reference
- § 12-15(ii) cites the 2020 Edition
- Permit required
- Before any electrical work (§ 12-15(h))
- Enforcing agency
- Dept. of Planning and Zoning
- Maximum fine
- $1,000 per day, petty offense
- Geographic scope
- Unincorporated Peoria County only
Summary
Electrical work in unincorporated Peoria County must follow the National Electrical Code, adopted by reference in Peoria County Code Section 12-22, with a building permit required before any electrical system is erected, altered, or replaced.
Sec. 12-22. - Compliance with NFPA 70: National Electrical Code 2017 Edition Required. The NFPA 70: National Electrical Code 2017 Edition is hereby adopted by reference. ... Chapter 27, Electrical. The NFPA 70, National Electrical Code, 2020 Edition shall be followed for all design and installation of electrical systems, alterations, repairs, replacement, equipment, appliances, fixtures, fittings and appurtenances thereto.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 52).
Full Breakdown
Section 12-22, in Article VI of Chapter 12, adopts NFPA 70, the National Electrical Code, 2017 Edition, by reference for the unincorporated county. The county's general cross-reference section, 12-10(d), confirms that any reference elsewhere in the adopted codes to the 'ICC Electrical Code' is to be read as this NFPA 70, 2017 Edition standard. Notably, the county's separate Building Code amendments in Section 12-15(ii) replace International Building Code Chapter 27 with language citing the National Electrical Code's 2020 Edition instead, so the two chapters of county code point to different vintages of the same national standard.
1 of the adopted Building Code, requires anyone who intends to erect, install, alter, remove, convert, or replace an electrical system to first apply to the building official and obtain a permit. This chapter, including the electrical code, applies only in the unincorporated areas of Peoria County under Section 12-1(a); incorporated cities enforce their own codes. The Department of Planning and Zoning, headed by the Director of Planning and Zoning, administers permits and inspections, and no permit issues until the fee set under Section 12-11 has been paid.
Violations & Fines
Performing electrical work without a permit, or in violation of the adopted code, is a petty offense under Peoria County Code Section 12-6(a), carrying a fine of up to $1,000, with each day the violation continues treated as a separate offense. The building official can post a notice of violation under Section 12-12 and issue a stop-work order under Section 12-6(d), and the county can pursue enforcement through the State's Attorney's office or its Code Hearing Unit.
Frequently Asked Questions
Which electrical code does Peoria County actually enforce?
Do I need a permit for electrical work at my house?
Does this rule apply if I live inside the City of Peoria?
What's the penalty for unpermitted electrical work?
Sources & Official References
Other rules in Peoria County
Compare Peoria County to another location·View the Illinois building safety overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.