DeKalb County, GA Building Safety: Electrical Permits (2026)
Key Facts
- Adopted code
- National Electrical Code
- Amendments
- Georgia state amendments apply
- Permit trigger
- Before work begins; ordinary repairs excepted
- Enforced by
- County building official
- Applies
- Unincorporated DeKalb only
Summary
Electrical work in unincorporated DeKalb County must conform to the National Electrical Code, adopted through County Code § 7-51(a)(6) with the Georgia amendments currently adopted by the state Board of Community Affairs, and § 7-30(a) requires a permit before electrical work begins, other than ordinary repairs.
All new construction, installations, repairs or alterations shall be in conformance with the current edition of the following codes and referenced appendixes with Georgia amendments as currently adopted by the Board of Community Affairs of the Georgia Department of Community Affairs:(1)International Building Code.(2)International Residential Code and Appendix G.(3)International Plumbing Code and Sections 703.6 of Appendix J in the Georgia Amendments.(4)International Mechanical Code.(5)International Fuel Gas Code.(6)National Electrical Code.
Full Breakdown
Chapter 7 of the DeKalb County Code sets construction standards for the unincorporated county by adoption. Section 7-51(a) requires that all new construction, installations, repairs or alterations conform to the current edition of a list of codes with Georgia amendments as adopted by the Board of Community Affairs of the Georgia Department of Community Affairs; the National Electrical Code is item (6) on that list, sitting alongside the International Building Code, the International Residential Code and Appendix G, the International Plumbing Code, the International Mechanical Code and the International Fuel Gas Code.
Because the ordinance points to the current edition as adopted by the state board, the electrical standard in force updates automatically when the state adopts a newer edition rather than staying frozen to one code year. Section 7-30(a) adds the permitting layer: a permit is required before electrical work begins, with ordinary repairs excepted, and the county building official enforces the standard through inspection before sign-off. These rules reach only unincorporated DeKalb; Dunwoody, Brookhaven, Tucker, Stonecrest, Decatur, Chamblee, Doraville, Clarkston, Avondale Estates, Lithonia, Pine Lake and Stone Mountain each issue their own electrical permits under their own codes.
Violations & Fines
Electrical work that does not conform to the adopted National Electrical Code fails county inspection and must be corrected before the building official will sign off on the work or issue a certificate of occupancy.
Frequently Asked Questions
Does DeKalb County require an electrical permit?
Which edition of the electrical code applies?
Does this rule apply inside Decatur or Dunwoody?
Sources & Official References
Other rules in DeKalb County
Compare DeKalb County to another location·View the Georgia building safety overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.