Skip to main content

Alpine, TX Building Safety: Plumbing Permits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified November 2026

Key Facts

Adopted code
2021 International Plumbing Code, appendices A, C and E
Permit office
The building official (§ 18-2)
Local amendment
§ 606.7 limits piping under slabs to copper type K, PEX or PEX-AL-PEX
Backflow testing
On installation and at least annually for health hazards
Test reports due
Within five days
Penalty
Class C misdemeanor, fine up to $500.00 (§ 18-74)

Summary

Alpine adopts the 2021 International Plumbing Code, including appendices A, C and E, as its official plumbing code, with a local amendment on piping under slabs. A permit from the building official is required before plumbing systems are erected, installed, altered, repaired or replaced. Violations carry a fine up to $500.00 per offense.

(a) Adopted. ... The International Plumbing Code, 2021 edition, including appendices A, C and E, are hereby adopted and incorporated for all purposes as the official plumbing code of the city. The official copy of the building code is on file in the office of the chief building official. ... Section 606 (Installation of the Building Water Distribution System) is amended by adding section 606.7 to read as follows: "606.7 Materials below slab. Water distribution piping installed under concrete slabs shall be copper (minimum type K), cross-link polyethylene (PEX) tubing, or cross-linked polyethylene/aluminum/ polyethylene (PEX-AL-PEX) pipe, all installed without joints or connections. Materials subject to corrosion shall be protected when exposed to concrete or corrosive soils."

Full Breakdown

Section 18-71(a) adopts the International Plumbing Code, 2021 edition, including appendices A, C and E, for all purposes as the official plumbing code of the city, with the official copy on file in the office of the chief building official. Alpine amends that code in Section 18-72. New Section 606.7 (Materials below slab) requires water distribution piping installed under concrete slabs to be copper (minimum type K), cross-link polyethylene (PEX) tubing, or PEX-AL-PEX pipe, all installed without joints or connections, and requires materials subject to corrosion to be protected when exposed to concrete or corrosive soils.

The permit duty itself sits in Section 18-2. An owner or owner's authorized agent who intends to erect, install, enlarge, alter, repair, remove, convert or replace any plumbing system regulated by the code, or to cause that work to be performed, shall first apply to the building official and obtain the required permit. Section 18-3 sets plumbing permit fees by Appendix B: Building Services Fees, adopted by annual city council resolution. The permit paragraph at Section 18-73(b)(1) is marked Reserved, so Section 18-2 is the operative requirement.

Section 18-73(a) adds inspection conditions that attach to water service. A customer service inspection certification must be completed before continuous water service is provided to a new connection, and also after any material improvements, corrections, or addition to a private plumbing facility. Backflow prevention assemblies must be tested upon installation by a recognized tester, and assemblies that protect against health hazards must be tested and certified at least annually. Test records and repairs must be submitted to the city within five days, and the signed original test report goes to the city building and zoning regulation department within five days of the test. A serious threat to the public water supply is sufficient grounds for immediate termination of water service.

Violations & Fines

Section 18-74(a) makes a violation of the plumbing article a class C misdemeanor, punishable on conviction by a fine not to exceed $500.00. Each day the violation continues is a separate and distinct offense, officers and agents actively in charge of a corporation share the penalty, and a culpable mental state need not be proved. Under Section 18-73(a), a serious threat to the integrity of the public water supply is sufficient grounds for immediate termination of water service.

Frequently Asked Questions

Which plumbing code does Alpine use?
Section 18-71(a) adopts the International Plumbing Code, 2021 edition, including appendices A, C and E, as the official plumbing code of the city. The official copy is on file in the office of the chief building official, who also administers the permits that cover plumbing work.
Do I need a plumbing permit in Alpine?
Yes. Section 18-2 requires an owner or authorized agent to apply to the building official and obtain the required permit before erecting, installing, enlarging, altering, repairing, removing, converting or replacing a plumbing system regulated by the code. Fees come from Appendix B: Building Services Fees.
What pipe can go under a slab in Alpine?
Section 18-72 adds IPC Section 606.7. Water piping under concrete slabs must be copper of minimum type K, cross-link polyethylene (PEX) tubing, or PEX-AL-PEX pipe, installed without joints or connections, with corrosion-prone materials protected from concrete or corrosive soils. This is an Alpine amendment to the base 2021 code.
How often are backflow assemblies tested in Alpine?
Under Section 18-73(a)(2), assemblies must be tested upon installation, and those that protect against health hazards must be tested and certified at least annually. Records of tests, repairs and overhauls go to the city within five days, and the customer carries the expense of repairs.

Sources & Official References

Other rules in Alpine

All Alpine rules

Texas rules heatmap·Compare Alpine to another location·View the Texas building safety overview

Get notified when Plumbing Permits in Alpine, TX changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.