Skip to main content
CityRuleLookup

Montgomery County, MD Building Setbacks & Zoning: Setback Rules (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

R-200 front setback
40 feet
R-200 side setback
12 feet (25' combined)
R-200 rear setback
30 feet
Governing law
Chapter 59, Division 4.4

Summary

In the R-200 residential zone, Montgomery County requires a 40-foot front setback, 12-foot side setbacks (25 feet combined), and a 30-foot rear setback for the principal building.

City-specific rules exist: Gaithersburg, and Rockville have their own setback rules rules that differ from Montgomery County's county-level regulations. If you live in one of those cities, check the city-specific page instead.

Principal Building Setbacks (min) Front setback 40' Side street setback, abutting lot fronts on the side street and is in a 40' Residential Detached zone Side street setback, abutting lot does not front on the side street or is not 15' in a Residential Detached zone Side setback 12' Sum of side setbacks 25' Rear setback 30' Specification for Principal Building Setbacks a. Development may have to satisfy Section

Source: Montgomery County Zoning Ordinance Ch. 59View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: 2026 S-90: Montgomery County Code contains legislation effective through May 7, 2026 | Zoning Updated Effective: April 13, 2026 | COMCOR Regulations effective as of July 1, 2026).

Full Breakdown

Montgomery County's Zoning Ordinance sets minimum yard setbacks by zone rather than one countywide number. For a detached house or other principal building in the R-200 zone (20,000-square-foot minimum lot), the Zoning Ordinance requires a 40-foot front setback, a 12-foot side setback (25 feet total for both sides), and a 30-foot rear setback; a side street setback of 40 or 15 feet applies depending on the adjoining lot. Accessory structures follow separate, generally smaller setbacks. Every other residential zone (R-90, R-150, R-400, RE-1, RE-2, etc.) carries its own setback table in Division 4.4 of Chapter 59.

Violations & Fines

Building closer to a lot line than the zone allows is a zoning violation; the Department of Permitting Services can deny or revoke permits and require correction, and an unpenalized violation defaults to a Class A civil violation carrying up to a $500 fine for an initial offense.

Frequently Asked Questions

Do all Montgomery County zones use the same setbacks?
No. Each residential zone in Division 4.4 of Chapter 59 has its own setback table; R-200 requires 40' front, 12' side, 30' rear.
Does this apply inside Rockville or Gaithersburg?
No. Zoning Ordinance Section 1.3.2 exempts Brookeville, Poolesville, Laytonsville, Rockville, Barnesville, Gaithersburg, and Washington Grove, which have their own zoning codes.

Sources & Official References

Other rules in Montgomery County

All Montgomery County rules

Compare Montgomery County to another location·View the Maryland building setbacks & zoning overview

Get notified when Setback Rules in Montgomery County, MD changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Setback Rules in Cities Across Montgomery County