Sussex County, DE Building Setbacks & Zoning: Setback Rules (2026)
Key Facts
- AR-1/AR-2 front yard
- 40 ft (30 ft on numbered highways)
- AR-1/AR-2 side yard
- 15 feet
- AR-1/AR-2 rear yard
- 20 feet
- Central-sewer cluster lots
- 25/10/10 feet front/side/rear
- Corner lot side-street front yard
- at least 15 feet, any district
- Administrative variance fee
- $50, up to 1 foot
Summary
In the AR-1 and AR-2 Agricultural Residential Districts, Sussex County's default zoning outside incorporated towns, § 115-25(C) sets a 40-foot front yard (30 feet on numbered highways), a 15-foot side yard and a 20-foot rear yard, dropping to 25/10/10 feet for central-sewer cluster development.
C. Minimum yard requirements. Minimum yard requirements shall be as follows: District Depth of Front Yard (feet) Width of Side Yard* (feet) Depth of Rear Yard (feet) Minimum Lot Width (feet) AR-1 and AR-2 (Cluster with central sewer) 25 10 10 60 AR- and AR-2 (All others) 40(30)** 15 20 100
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4401089; v17 updated 2025-06-17; through 06-17-2025).
Full Breakdown
Sussex County Code § 115-25(C) sets the base yard table for the AR-1 and AR-2 Agricultural Residential Districts: standard lots need a 40-foot front yard (reduced to 30 feet where the frontage is a numbered highway shown on the county's General Highway Map), a 15-foot side yard and a 20-foot rear yard, on a minimum 100-foot-wide lot. Cluster development served by central sewer gets a reduced table of a 25-foot front yard, 10-foot side yard and 10-foot rear yard on a 60-foot-wide lot. Other zoning districts, such as GR General Residential or the HR High-Density Residential Districts, carry separate yard tables elsewhere in Chapter 115, so the controlling numbers depend on the parcel's zoning classification.
Article XXV's supplementary rules modify these baseline numbers. Section 115-182(B) requires at least a 15-foot front yard on the side street of any corner lot in any district. Section 115-182(C) lets an infill lot match the average setback of existing buildings within 300 feet on the same side of the street, but never reduces the front yard below 5 feet, and that averaging rule does not apply to cluster subdivisions, Coastal Area cluster subdivisions or residential planned communities. On the side and rear, § 115-183(D) allows any existing approved lot under 10,000 square feet to reduce its side setback to 5 feet and its rear setback by 5 feet, with no structure allowed closer than 5 feet to the lot line. The Director of Planning and Zoning can also administratively grant a setback variance of up to one foot for a $50 fee under § 115-181(E), without a full Board of Adjustment hearing.
Violations & Fines
Sussex County enforces yard requirements through the Director of Planning and Zoning under § 115-228, who can refuse building permits or order corrective action for encroaching structures. Under § 115-229, an unpermitted setback violation is a misdemeanor carrying a fine of up to $100, with each day the encroachment continues charged as a separate offense against the property owner and any contractor who assisted.
Frequently Asked Questions
What is the front yard setback in unincorporated Sussex County?
Can I match my neighbors' setbacks if my street was built before current rules?
Do small older lots get reduced side and rear setbacks?
Is there a cheaper option than a Board of Adjustment hearing for a small setback shortfall?
Sources & Official References
Other rules in Sussex County
Compare Sussex County to another location·View the Delaware building setbacks & zoning overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.