Skip to main content
CityRuleLookup

Mesa County, CO Building Setbacks & Zoning: Setback Rules (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Governing section
LDC Chapter 5 dimensional tables
RSF-4 street setback
20/25 feet
RSF-4 side setback
7/3 feet
RSF-4 rear setback
20/10 feet
Variance body
Board of Adjustment, § 4.22
Cul-de-sac frontage reduction
30 feet minimum

Summary

Mesa County sets minimum yard setbacks by zoning district in the LDC's Density and Dimensional Standards tables. In the RSF-4 single-family/duplex district, for example, the standard is 20/25 feet from the street, 7/3 feet on the side, and 20/10 feet at the rear, split between principal and accessory structures.

These county ordinances apply to unincorporated areas of Mesa County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

E. Residential Single Family - 4 District (RSF-4) The Residential Single Family - 4 District is primarily intended to accommodate medium-density, single-family and duplex residential development. Zoning District ... Minimum Lot Size (net) ... Minimum Street Frontage (feet) ... Minimum Setbacks (feet) Principal/Accessory2, 4 ... Street 20/25, Side 7/3, Rear 20/10 ... 4 [max] 2 [min] ... 7,000 [sq ft] 75' ... Maximum Lot Coverage 50% ... Maximum Height (feet) 35

Full Breakdown

Chapter 5 of the 2020 Land Development Code sets minimum setbacks separately for each of the county's roughly two dozen zoning districts through a Density and Dimensional Standards table under each district heading. The Residential Single Family - 4 District (RSF-4), the LDC's medium-density single-family and duplex zone, requires a minimum lot area of 7,000 square feet and 75 feet of street frontage, and lists setbacks of 20/25 feet along the street, 7/3 feet on the side, and 20/10 feet at the rear (the paired figures split principal-structure and accessory-structure distances per the table's footnotes 2 and 4).

E, as unobstructed open areas between the furthermost projection of a structure and the abutting right-of-way line (street setback) or the property line (side and rear setbacks); they must stay clear from the ground to the sky except for limited encroachments such as landscaping or bay windows up to three feet. Footnote 2 to the Chapter 5 tables allows a street setback to shrink to 14 feet where rear lot lines back onto a Utility or Landscape Outlot, excluding any garage facing a street, and footnote 1 allows street frontage on a cul-de-sac to shrink to 30 feet.

22, though the Board cannot grant a variance that functions as a use variance or that allows a use not permitted in that zoning district.

Violations & Fines

Building or maintaining a structure that reduces or diminishes a required setback is a violation of the LDC under Section 11.02.F ('Making Lots or Setbacks Nonconforming'), and Section 11.02.B separately makes it a violation to erect or maintain any structure in contravention of any LDC zoning regulation. The County can withhold or revoke permits on the property under Section 11.04.A and C, issue a stop-work order, or seek an injunction or abatement in court under C.R.S. § 30-28-124, with each additional day of an uncorrected violation counted separately under Section 11.03.

Frequently Asked Questions

How far must a house sit back from the street in an RSF-4 lot?
The LDC's Chapter 5 dimensional standards table sets the RSF-4 street setback at 20/25 feet, with side setbacks of 7/3 feet and rear setbacks of 20/10 feet, the paired numbers splitting principal and accessory structure distances under the table footnotes.
Can I get a smaller setback than the table requires?
Yes, through a dimensional variance from the Board of Adjustment under LDC Section 4.22, but the Board cannot approve a variance that functions as a use variance or that permits a use not otherwise allowed in that zoning district.
What counts as encroaching into a required setback?
Setbacks must stay clear from the ground to the sky under Section 7.01.E, but the LDC allows limited encroachments such as landscaping and bay windows projecting up to three feet into the required setback area.
What happens if a structure violates the required setback?
It is a Land Development Code violation under Section 11.02, and the County can withhold or revoke permits on the property, issue a stop-work order, or pursue an injunction or abatement action in court, with continued noncompliance treated as a new violation each day.

Sources & Official References

Other rules in Mesa County

All Mesa County rules

Compare Mesa County to another location·View the Colorado building setbacks & zoning overview

Get notified when Setback Rules in Mesa County, CO changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.