Delaware County, PA Building Setbacks & Zoning: Structure Height Limits (2026)
Key Facts
- County rule
- None
- Enabling clause
- MPC §603(b)(2)
- Upper Darby R-2 max height
- 35 feet
- Upper Darby accessory
- 15 feet max
- Relief
- Variance from zoning hearing board
Summary
Delaware County, PA sets no building-height limit. Under the PA Municipalities Planning Code, each borough or township caps structure height by zoning district. In Upper Darby Township's R-2 district the maximum building height is 35 feet, and accessory buildings may not exceed 15 feet. Confirm the limit for your parcel
Size, height, bulk, location, erection, construction, repair, maintenance, alteration, razing, removal and use of structures.
Full Breakdown
Maximum building height in Delaware County is a municipal zoning matter, not a county one. The PA Municipalities Planning Code authorizes it at Section 603(b)(2): zoning ordinances may regulate the "Size, height, bulk, location, erection, construction... and use of structures." Each borough and township then sets height limits per zoning district, usually in feet, sometimes in stories. As a representative example, Upper Darby Township's R-2 Residence District caps the maximum building height at 35 feet; the township separately provides that no accessory building shall exceed 15 feet in height. Height is generally measured from average grade to the mean or peak roofline as defined in each ordinance, and rooftop mechanical, chimneys and antennas often have their own exceptions.
Violations & Fines
Height enforcement is municipal. Exceeding the district height limit without a variance is a zoning violation handled by the local zoning officer and zoning hearing board.
Frequently Asked Questions
How tall can I build in Delaware County, PA?
How is building height measured?
Sources & Official References
Other rules in Delaware County
Compare Delaware County to another location·View the Pennsylvania building setbacks & zoning overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.