Building Setbacks & Zoning in Baldwin Park, CA (2026)
3 verified building setbacks & zoning rules for Baldwin Park, California, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
Baldwin Park sets setbacks by zone in Table 153.040.030. Single-family R-1 and R-1-7,500 require a 20-foot front setback (15 feet with a side-entry garage), 5-foot interior side setback, and 20-foot rear setback. Multi-family R-G/R-3 require 15-foot front, 10-foot side, and 10-foot rear setbacks. Two-story additions facing a side/rear line need extra setback.
Baldwin Park Building Setback Rules
Some RestrictionsStructure Height Limits
Baldwin Park caps building height in single-family R-1-7,500, R-1 and garden R-G zones at 27 feet, and in high-density R-3 at 35 feet, per Table 153.040.030. Height is measured from average finished grade to the highest roof point (Section 153.130.040). Accessory structures are limited to one story or 15 feet. Certain rooftop equipment may exceed the limit by up to 15 feet with review.
Baldwin Park Structure Height Limits
Some RestrictionsLot Coverage Limits
Baldwin Park limits maximum lot coverage by zone in Table 153.040.030: 40% in R-1-7,500, 45% in R-1, 50% in R-G, and 60% in R-3. The code also sets minimum lot areas (7,500 sf in R-1-7,500; 5,000 sf in R-1/R-G/R-3) and minimum private open space, which together with setbacks limit how much of a lot can be built upon.
Baldwin Park Lot Coverage Limits
Some RestrictionsLooking for Los Angeles County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Baldwin Park city rules.
Building Setbacks & Zoning in Los Angeles County →