Building Setbacks & Zoning in Ceres, CA (2026)
3 verified building setbacks & zoning rules for Ceres, California, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
In Ceres, R-1 single-family lots need a 20-foot front setback, 12-foot and 5-foot interior side yards, and a rear yard equal to 15 percent of lot depth, capped at 25 feet.
Ceres Yard Setback Minimums by Zone
Some RestrictionsCeres Municipal Code § 18.08.060(D)
Front yard. Twenty feet minimum, except detached accessory structures shall have a 35-foot minimum front yard setback. No accessory structure/building shall be located within the front yard or exterior side yard area of a single-family lot.2.Side yard.a.Interior side yard. For lots having two interior side yard areas, one such interior side yard shall have a setback of at least 12 feet, and the...
Structure Height Limits
In Ceres's R-1 single-family zone, no main building may rise above two stories or 25 feet, whichever is less, and detached accessory structures cap out at one story or 15 feet.
Ceres R-1 Building Height Limit
Some RestrictionsCeres Municipal Code Section 18.08.060(G)
Building height requirements. No main building shall have a height greater than two stories or 25 feet; whichever is less as defined under section 18.02.010 of this title. No accessory building erected shall have a height greater than one story or 15 feet, whichever is less.
Lot Coverage Limits
In Ceres' R-1 single-family zone, structures can cover no more than 40 percent of the lot, with an extra 10 percent allowed for accessory buildings once the house already hits that cap.
Ceres Caps Single-Family Lot Coverage at 40%
Some RestrictionsCeres Municipal Code § 18.08.060(B)
Lot coverage. The maximum allowable lot coverage by structures for all uses shall be 40 percent. Additional ten percent allowable lot coverage is provided for accessory structures proposed on single-family lots when the dwelling footprint has reached the 40 percent maximum. The additional ten percent allowance shall be calculated based on multiplying ten percent by the size of the lot.