Fence Regulations in Johns Creek, GA (2026)
4 verified fence regulations for Johns Creek, Georgia, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
Johns Creek zoning caps residential fences and walls at 8 feet from grade, requires a 3-foot setback from public rights-of-way, and bars fences from blocking the city's required sight-distance visibility triangle.
Johns Creek Fence Height and Setback Rules
Some RestrictionsJohns Creek Code of Ordinances, App. A (Zoning), § 4.11 (Fences and Walls) (Ord. No. 2015-12-42, Exh. A, 1-25-2016)
A. Visibility Triangle. Fences, walls and vegetative materials used in association therewith must not obstruct the minimum sight distance requirements... E. Height. Fences and walls shall not exceed a height of eight feet from grade in residential districts. Column and ornament heights are permitted to exceed the maximum fence/wall height up to 3 feet. F. Setback. Fences and walls shall be set ...
Fence Permit Requirements
Fences and walls in Johns Creek need a Community Development Department permit before construction; only fences built for agricultural use in the AG-1 district are exempt from this requirement.
Johns Creek Fence Permit Requirement
Some RestrictionsJohns Creek Code of Ordinances, App. A (Zoning), § 4.11 (Ord. No. 2015-12-42, Exh. A, 1-25-2016)
Fences and walls which conform to the provisions stated herein shall be permitted by the Community Development Department. Fences erected for agricultural purposes in the AG-1 District shall be exempt from permit requirements.
Retaining Walls
Johns Creek, Georgia requires a permit for every retaining wall, an owner's indemnification agreement above four feet, and a licensed engineer's certified design for any wall over six feet.
Johns Creek Retaining Wall Height and Permit Rules
Some RestrictionsJohns Creek Code of Ordinances § 113-163(2)-(3)
Permits required. Where retaining walls are to be installed permits shall be obtained in accordance with article VI of these regulations. Indemnification/certification. For all retaining walls over four feet in height, the owner of the property containing the proposed wall shall complete an owner's indemnification agreement. For all retaining walls over six feet in height, a professional engine...
Material Restrictions
Johns Creek bans barbed wire on every single-family dwelling lot, including those in the AG-1 district, though it stays legal for agricultural use in AG-1 and as a security strand elsewhere at 6 feet or higher.
Johns Creek Barbed Wire Fence Ban
Significant RestrictionsJohns Creek Code of Ordinances, App. A (Zoning), § 4.11.D.3 (Ord. No. 2015-12-42, Exh. A, 1-25-2016)
Barbed wire may be used in the AG-1 District as long as its use is associated with a legitimate agricultural pursuit. Barbed wire shall not be approved for any single-family dwelling lots including such lots which are located in the AG-1 District. Barbed wire may be used for security strands in all but single-family dwelling districts at a height of at least 6 feet above grade.4.Minimum Landsca...
Looking for Fulton County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Johns Creek city rules.
Fence Regulations in Fulton County →