Fence Regulations in Marysville, WA (2026)
4 verified fence regulations for Marysville, Washington, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
Marysville caps front-yard fences at four feet solid (six if open-work) on local streets and six feet on side, rear, and arterial-facing lines, plus a no-obstruction sight-triangle rule at corners.
Marysville Fence Height Limits By Lot Line
Some RestrictionsMarysville Municipal Code § 22C.010.380(3)
Height. (a) Access Streets. (i) Front lot line: Four feet solid or six feet if entirely open-work fence. (ii) Side lot line: Six feet. (iii) Rear lot line: Six feet. (b) Arterial Streets. (i) Front lot line: Six feet; provided, that the top two feet are constructed as an open-work fence. (ii) Side lot line: Six feet. (iii) Rear lot line: Six feet. (c) When a protectiv...
Fence Permit Requirements
Marysville regulates fence height, setback and materials under Marysville Municipal Code § 22C.010.380. A solid front-yard fence over four feet must sit back at least 20 feet from the street right-of-way, and any fence taller than six feet needs a city building permit. Barbed and razor wire are banned citywide except for a few listed uses.
Marysville Fence Height, Setback, Permit Rules
Some RestrictionsMarysville Municipal Code § 22C.010.380(4)(a), (5)(a), (c), (e)
(4) Setbacks. (a) Front Lot Line. (i) Solid fences greater than four feet in height shall be set back at least 20 feet from the street right-of-way... (5) Fence Variances. (a) The community development director shall have authority to administratively grant a variance to the fence requirements outlined in this section... (c) In considering a request for a modification of the fence requirements ...
Retaining Walls
Marysville retaining walls over 4 feet need a building permit, and any wall over 4 feet that is visible from the street or a neighboring property must be terraced with landscaped tiers.
Marysville Retaining Wall Height Rules
Some RestrictionsMarysville Municipal Code § 22D.050.030(4)(e)
If retaining walls taller than four feet are used, as measured from the average grade, and are visible from the street or adjacent property, they shall be terraced so that no individual segment is taller than four feet; provided, that where adjacent properties are not adversely affected or the retaining wall is minor in nature, the community development director may reduce or waive these standa...
Material Restrictions
Marysville bans barbed wire and razor wire on fences citywide, with narrow exceptions for livestock confinement, utility and transformer sites, and government security installations.
Marysville Bans Barbed and Razor Wire Fences
Significant RestrictionsMarysville Municipal Code § 22C.010.380(2)(b)
No barbed or razor-wire fence shall be permitted, except for the following: (i) Confinement of livestock. (ii) Public facilities, transmitter and transformer sites. (iii) Government installations where security or public safety is required. (3) Height. (a) Access Streets. (i) Front lot line: Four feet solid or six feet if entirely open-work fence. (ii) Side lot line: Six fe...
Looking for Snohomish County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Marysville city rules.
Fence Regulations in Snohomish County →