Building Setbacks & Zoning in Middleton, WI (2026)
3 verified building setbacks & zoning rules for Middleton, Wisconsin, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
In Middleton's SR-L Single-Family Residential Low Density district, City of Middleton Zoning Code Section 10.02.10(7) sets a 20-foot minimum front setback, an 8-foot minimum interior side setback, and a 25-foot minimum rear setback, with a 20-foot corner-lot street-side setback.
SR-L District Setback Minimums in Middleton
Some RestrictionsCity of Middleton Municipal Code § 10.02.10(7)
Minimum Lot Area 7,200 square feet Maximum Impervious Surface Ratio 45 percent Minimum Lot Width 60 feet Minimum Lot Depth 120 feet Minimum Lot Frontage at Right-of-Way 30 feet Minimum Front Setback 20 feet Minimum Front-Loaded Attached Garage Setback* No more than 5 feet in front of the plane of the principal structure** Minimum Porch Setback (front and street side yards on corner lots)** 8 fe...
Structure Height Limits
The City of Middleton caps principal building height at 36 feet in its core single-family and multi-family residential zoning districts, from SR-L through MR-L, under City of Middleton Municipal Code § 10.02.10(7). Detached accessory buildings such as garages and sheds are held to 15 feet, or 22 feet if they meet the same setbacks required of the house itself.
Middleton Residential Building Height Limit
Some RestrictionsCity of Middleton Municipal Code § 10.02.10(7)
(7)Density, Intensity, and Bulk Regulations for the (SR-L) Single-Family Residential — Low Density District ... Maximum Principal Building Height 36 feet ... Accessory Buildings ... Maximum Height 15 feet, or 22 feet if the building adheres to principal setbacks
Lot Coverage Limits
The City of Middleton limits impervious surface, the combined footprint of buildings, driveways, patios and pavement, to 45 percent of any lot in the SR-L Single-Family Residential Low Density zoning district under City of Middleton Municipal Code § 10.02.10(7). The cap rises in denser districts: the SR-M district allows 55 percent and the MR-L multi-family district allows 70 percent. The Zoning Administrator checks the ratio at building-permit review.
Middleton Maximum Lot Coverage Limits
Some RestrictionsCity of Middleton Municipal Code § 10.02.10(7)
(7)Density, Intensity, and Bulk Regulations for the (SR-L) Single-Family Residential — Low Density District ... Maximum Impervious Surface Ratio 45 percent
Looking for Dane County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Middleton city rules.
Building Setbacks & Zoning in Dane County →