Fence Regulations in Roswell, GA (2026)
5 verified fence regulations for Roswell, Georgia, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
Roswell caps side- and rear-yard fences at 8 feet; front-yard fences over 4 feet must be 50% transparent, with 6 feet as the front-yard maximum, under the city's Unified Development Code.
Roswell Fence Height Limits
Some RestrictionsRoswell Unified Development Code § 10.2.10.A.7-8
7.A screening wall or fence located in a side yard or rear yard can be no more than 8 feet in height.8.A screening wall or fence located in a front yard that is greater than 4 feet in height to maximum 6 feet in height requires 50% transparency for the entire fence. For purposes of this Section the definition of front yard is from lot line to lot line and takes precedence over side yard definit...
Fence Permit Requirements
In Roswell's Historic Overlay District, adding, replacing or altering a fence, gate or screening wall requires a Minor Certificate of Appropriateness from the Zoning Director before any building or land-disturbance permit can issue.
Roswell Historic District Fence Permits
Significant RestrictionsRoswell Unified Development Code § 13.7.4
Minor Certificates of Appropriateness include modifications to the following. A.Windows (including storm shutters);B.Roofs;C.Residential accessibility structures;D.Storage sheds/ playhouses;E.Doors (including storm shutters);F.Drainage;G.Utility meters: electric, gas, cables;H.Exhaust/supply fans/plumbing vents;I.Fences/gates/screening walls;J.HVAC;K.Exterior lighting;L.Shutters;M.Siding and...
Neighbor Fence Rules
Roswell's Unified Development Code requires the finished, more presentable side of any fence or screening wall to face the abutting property, not the framing or posts.
Roswell Fence Finished-Face Rule
Some RestrictionsRoswell Unified Development Code section 10.2.10.A.9
The finished face of all screening walls and fences must be located toward the abutting property.10.Screening wall or fence height is measured from the subject property grade to the highest point of the fence. Screening walls or fences may not be used to retain dirt or other materials.B.Subdivision Entrances. A subdivision entrance wall or fence may not exceed 8 feet in height and is subject to...
Retaining Walls
Roswell requires an engineer's design for any retaining wall 8 feet or taller and Mayor and City Council review and approval for any wall 6 feet or taller under its Unified Development Code.
Roswell, GA Retaining Wall Engineering Rules
Significant RestrictionsRoswell Unified Development Code § 10.5.2.C
C. All retaining walls equal to or greater than 8 feet shall be designed by a qualified registered professional engineer. All proposed retaining walls equal to or greater than 6 feet in height will be subject to review and approval by the Mayor and City Council.
Material Restrictions
Roswell requires fences be built of wood, wrought iron, composite, PVC, aluminum or metal; alternative materials need Design Review Board or Historic Preservation Commission approval, and tires or junk are banned outright.
Roswell Fence Material Standards
Some RestrictionsRoswell Unified Development Code § 10.2.10.A.1, .3
1.Fences must be constructed of high quality materials including one or a combination of the following: wood; wrought iron; composite fencing, PVC; aluminum; and metal. If subject to design or historic review, an alternative fence material may be approved by the Design Review Board or Historic Preservation Commission, as applicable.2.Screening walls must be constructed of high quality materials...
Looking for Fulton County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Roswell city rules.
Fence Regulations in Fulton County →