Fence Regulations in San Jacinto, CA (2026)
4 verified fence regulations for San Jacinto, California, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
In the City of San Jacinto, California, a fence or wall in a front yard setback area tops out at 4 feet, while side, street side and rear yards allow 6 feet, or 8 feet in industrial zones. Section 17.315.020 sets those limits, and § 17.305.150 caps anything in a corner traffic visibility area at 30 inches.
Fence Height Limits in San Jacinto, California
Some RestrictionsSan Jacinto Municipal Code § 17.315.020
Front Yard Setback Areas Fences and Walls — Maximum Height Hedges — Maximum Height RE and RR Zones 4 ft. open or solid fencing (additional 2 ft open may be constructed on top for overall height of 6 ft.) 4-ft RL, RM, RH, RVH Zones 4 ft. open or solid fencing All other Zones 4 ft. open or solid fencing* 6-ft Interior side yards, street side yards, rear yards, and all other areas not listed herei...
Fence Permit Requirements
In the City of San Jacinto, California, a fence or wall can be installed only after a building permit is issued, and the Director must first review and approve plans for any new fence or wall or any replacement or repair of an existing one. Section 17.315.080 sets both steps.
Fence Permit Requirements in San Jacinto, California
Some RestrictionsSan Jacinto Municipal Code § 17.315.080
A. Department review and approval required. 1. Any person proposing to install a new wall or fence or replace or repair an existing wall or fence shall submit copies of the plans and details to the Director for review and approval. The submittal package shall include a plot plan drawn to scale, reflecting lot lines, adjacent public rights-of-way, driveways and existing buildings and structures....
Retaining Walls
In the City of San Jacinto, California, an embankment over 48 inches must be stepped so no exposed retaining wall exceeds 48 inches, with each step at least 36 inches wide. Section 17.315.050 also limits a retaining wall in a front setback area to 48 inches and 5% coverage, and bars walls from the corner lot visibility area.
Retaining Wall Rules in San Jacinto, California
Some RestrictionsSan Jacinto Municipal Code § 17.315.050
A. Stepped retaining walls. Slopes are discouraged. An embankment to be retained that is over 48 inches in height shall be stepped so that no individual exposed retaining wall exceeds 48 inches in height, and each intervening step is a minimum width of 36 inches. See Figure 3-14 (Stepped Retaining Walls). ... B. Retaining walls in required front setback area. Retaining walls not exceeding 48 in...
Material Restrictions
In the City of San Jacinto, California, § 17.315.070 bans barbed or razor wire in any fence unless the Director approves it for an industrial or agricultural use, bans electrified fencing along property lines in every zoning district unless required by law, and bans chain link with slats or tarps. Residential street-facing fences also exclude wood.
Prohibited Fence Materials in San Jacinto, California
Significant RestrictionsSan Jacinto Municipal Code § 17.315.070
a. Barbed, razor wire or a similar type wire shall not be used as any part of a fence except where approved by the Director for use in conjunction with an industrial or agricultural use. Barbed, razor wire or similar type wire when permitted by the Director not be placed where it will be visible from any facing street or right-of-way. b. Electrified fencing. The use of electrified fencing or wi...
Looking for Riverside County county-wide rules?
County ordinances apply to unincorporated areas and may supplement San Jacinto city rules.
Fence Regulations in Riverside County →