Building Setbacks & Zoning in Stratford, CT (2026)
2 verified building setbacks & zoning rules for Stratford, Connecticut, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
In the Town of Stratford, Connecticut, the Zoning Commission sets minimum front, side and rear yards in a table in Section 3.2.1 of the Stratford Zoning Regulations. Front yards run from 20 to 40 feet, side yards from 10 to 35 feet and rear yards from 25 to 35 feet, depending on the RS district.
Stratford CT Yard Setbacks in RS Zones
Some RestrictionsStratford Zoning Regulations Section 3.2.1
C. Dimensional standards. ... The following dimensional standards shall apply to all development within the Single-Family Residence Districts. Supplemental dimensional standards found in Section 4.4 (Use Related Standards) and Section 6 (Site Development Standards) shall also be required. District Minimums Maximums Lot Dimensions Yards Building Coverage Impervious Coverage Building Height Area ...
Lot Coverage Limits
The Stratford Zoning Regulations cap building coverage and impervious coverage in the Single-Family Residence Districts of the Town of Stratford, Connecticut. Building coverage tops out at 10 percent in RS-1 and rises to 25 percent in RS-4, while impervious coverage runs from 20 percent to 50 percent.
Stratford CT Lot Coverage Limits in RS Zones
Some RestrictionsStratford Zoning Regulations Section 3.2.1
District Minimums Maximums Lot Dimensions Yards Building Coverage Impervious Coverage Building Height Area (square feet) Width (feet) Depth (feet) Front (feet) Side (feet) Rear (feet) RS-1 40,000 150 125 40 35 35 10% 20% 30 feet RS-2 20,000 100 125 30 20 35 15% 30% 30 feet RS-3 10,000 100 90 25 12 30 20% 40% 30 feet RS-4 7,500 60 90 20 10 25 25% 50% 30 feet