Building Setbacks & Zoning in Victorville, CA (2026)
3 verified building setbacks & zoning rules for Victorville, California, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
Victorville's Development Code Table 8-2 sets minimum yard setbacks by residential zone. An R-1 lot needs a 20-foot front setback for first-story living space, a 5-foot interior side setback, and a 20-foot rear setback with at least 15 feet kept usable. R-3 and R-4 lots allow smaller 15-foot front and rear setbacks, and any story above the second must step back further from the property line.
Victorville Yard Setback Minimums by Zone
Some RestrictionsVictorville, CA, Development Code Sec. 16-3.08.020, Table 8-2 (Residential Development Standards)
Table 8-2: Residential Development Standards. Residential Zoning Districts AE A S-R R-1 (7,200) R-2 R-3 R-4 MDR R-MPD. Minimum Front Yard Setbacks: Porch 25 20 14 20 10 10 20 20; First Story living 25 20 20 20 15 15 20 20. Minimum Side Yard Setback: Street side 10 10 10 10 10 10 10 10; Interior side 8 10 5 &10 5 & 10 5 5 5 5 5. Multi-story Setbacks at 3 rd story or higher: Facing property lines...
Structure Height Limits
Victorville caps residential building height by zoning district in Table 8-2 of the Development Code: 30 feet in the R-1 single-family district and the Suburban Residential zone, 35 feet in AE, MDR, and R-2, up to 45 feet in R-3, and 55 feet in R-4, though a footnote drops multi-family buildings in R-2 through R-4 to one story whenever they sit within 100 feet of an existing single-family home.
Victorville Residential Building Height Limits
Some RestrictionsVictorville, CA, Development Code Sec. 16-3.08.020, Table 8-2 (Residential Development Standards)
Table 8-2: Residential Development Standards / Residential Zoning Districts AE A S-R R-1 (7,200) R-2 R-3 R-4 MDR R-MPD ... Maximum Height 35 30 30 35 (1) 45 (1) 55 (1) 35 20 ... Notes for Table 8-2: (1)No principal building shall exceed a height of one story when located within one hundred feet of an existing single-family residence.
Lot Coverage Limits
Victorville's Mixed Use zoning districts cap building footprint at 40 percent of the lot in MU-1 for any development type, and in MU-2 at 50 percent for residential development or 60 percent for non-residential development, under Table 9-2 of Municipal Code Section 16-3.09.020. Other city districts carry their own separate coverage caps.
Victorville Mixed-Use Lot Coverage Caps
Some RestrictionsVictorville, CA, Development Code § 16-3.09.020, Table 9-2
Mixed Use Zoning Districts MU-1 MU-2 Site Requirements Non-Residential Maximum Floor Area Ratio (FAR) 0.5 1.0 Lot Coverage 40% (all types of development) 50% (residential development)/60% (non-residential development) Minimum Net Lot Area 10,000 sq. ft. 5 acres Maximum Dwelling Unit Density (per gross acre) Up to 15.0 Up to 30.0
Looking for San Bernardino County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Victorville city rules.
Building Setbacks & Zoning in San Bernardino County →