Whatcom County, WA Environmental Rules: Flood Elevation Requirements (2026)
Key Facts
- Freeboard rule
- base flood elevation + 1 foot
- Permit required
- floodplain development permit, § 17.12.010
- Residential rule
- lowest floor, incl. basement, to FPE
- Nonresidential option
- dry floodproof to FPE, § 17.16.090
- Data source
- FEMA Flood Insurance Study, Jan. 18, 2019
- Default freeboard
- 2 ft above grade if no FEMA data
Summary
In Whatcom County's mapped special flood hazard areas, the flood protection elevation is base flood elevation plus one foot, and new or substantially improved residential structures must have their lowest floor, including basement, built to or above that line under WCC § 17.10.020(D) and § 17.16.080(A).
D. The flood protection elevation shall be the base flood elevation plus one foot. ... A. New construction and substantial improvement of any residential structure shall have the lowest floor, including basement, elevated to or above the flood protection elevation, as determined in accordance with WCC § 17.10.020(D).
Full Breakdown
010). 020(A), (D)). 020(F)). 010). 080(B)). 090). 16 provisions on coastal high hazard areas). Applicants who cannot meet these standards may seek a variance, but any variance grant comes with written notice that flood insurance costs will rise because of the reduced elevation.
Violations & Fines
No structure or land may be constructed, extended, converted or altered in an SFHA without full compliance with Title 17 and a floodplain development permit (WCC § 17.04.080, § 17.12.010). Building below the required flood protection elevation without an approved variance exposes the owner to higher federal flood insurance premiums and can make a structure ineligible for standard-rate NFIP coverage. An administrator's interpretation of SFHA boundaries or a permit decision may be appealed to the Whatcom County hearing examiner (WCC § 17.10.010(B), § 17.12.060).
Frequently Asked Questions
How high above base flood elevation must I build in Whatcom County's floodplain?
Do I need a permit before building in a Whatcom County flood hazard area?
Can a commercial building floodproof instead of elevating in Whatcom County?
What if FEMA hasn't mapped a base flood elevation for my Whatcom County property?
Sources & Official References
Other rules in Whatcom County
Compare Whatcom County to another location·View the Washington environmental rules overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.