Skip to main content
CityRuleLookup

Alamance County, NC Environmental Rules: Flood Zones (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

FEMA flood zone rules in Alamance County, NC, also called floodplain regulations or special flood hazard area (SFHA) rules, determine flood insurance requirements and elevation standards for new construction.

Key Facts

Permit required
Floodplain Development Permit before any work
Issuing authority
Planning Director as Floodplain Administrator
Coverage area
County plus Village of Alamance ETJ
Map revision deadline
Adopt LOMR/PMR within 3 months
Stop-work violation
Misdemeanor

Summary

Any development within a Special Flood Hazard Area in Alamance County, including its extraterritorial jurisdiction with the Village of Alamance, requires a Floodplain Development Permit from the Planning Director before work begins, backed by a certified plot plan, flood zone designation, and proposed elevations.

These county ordinances apply to unincorporated areas of Alamance County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

This section applies to all Special Flood Hazard Areas within the jurisdiction of Alamance County, including Extra-Territorial Jurisdictions of the Village of Alamance. […] Application for a Floodplain Development Permit shall be made to the Planning Director, hereinafter referred to as the Floodplain Administrator, prior to any development activities located within Special Flood Hazard Areas.

View official code

Official source re-checked September 7, 2026: the cited page had not changed since it was quoted.

Full Breakdown

1 of the Unified Development Ordinance applies the county's flood damage prevention rules to every Special Flood Hazard Area within Alamance County's jurisdiction, including the Extra-Territorial Jurisdiction it shares with the Village of Alamance. Those areas are the ones mapped under FEMA's Flood Insurance Study and Digital Flood Insurance Rate Map panels, adopted by reference into the ordinance; later Letters of Map Revision or Physical Map Revisions must be adopted within three months. 4 requires anyone proposing development in a mapped Special Flood Hazard Area to apply to the Planning Director, who serves as Floodplain Administrator, for a Floodplain Development Permit before any work starts.

The application must include a certified plot plan showing the nature, location, dimensions, and elevations of the proposed development; the Special Flood Hazard Area boundary; the flood zone designation; the floodway or non-encroachment area boundary; the Base Flood Elevation where one has been set; and any relocation of a watercourse. Applicants must also submit proposed elevation data, tied to NAVD 1988, for the reference level of every structure and, where floodproofing is used for a non-residential building, a FEMA Floodproofing Certificate (Form 086-0-34) with an operational and maintenance plan.

Once a permit issues, the Floodplain Administrator can make onsite inspections as work progresses, issue a stop-work order if construction violates the ordinance or the permit's terms, and revoke the permit for a substantial departure from the approved plans or for false statements made to obtain it. The Administrator also advises owners whose lowest floor sits above the BFE that they may apply to FEMA for a Letter of Map Amendment.

Violations & Fines

Developing in a Special Flood Hazard Area without a Floodplain Development Permit, or violating the terms of one, is a violation of the Unified Development Ordinance. The Floodplain Administrator can order work stopped immediately, and violating a stop-work order is a misdemeanor. Any other flood-ordinance violation is subject to Section 4.4's general civil penalty of $500 per violation, with each day of continued noncompliance treated as a separate offense.

Frequently Asked Questions

Do I need a permit to build in a flood zone in Alamance County?
Yes. Section 6.4.4 requires a Floodplain Development Permit from the Planning Director, acting as Floodplain Administrator, before any development activity begins in a mapped Special Flood Hazard Area, including grading, fill placement, or new construction.
What has to be in the permit application?
A certified plot plan showing the Special Flood Hazard Area boundary, flood zone designation, floodway or non-encroachment area boundary, and Base Flood Elevation where set, plus proposed elevation data for every structure's reference level tied to NAVD 1988, under Section 6.4.4.
Does the floodplain ordinance apply outside county limits?
It reaches the unincorporated county and the Extra-Territorial Jurisdiction the county shares with the Village of Alamance, under Section 6.4.1. Land inside Burlington, Graham, Mebane, or Elon is governed by that municipality's own code, not the county's UDO.
What happens if I build without the permit?
The Floodplain Administrator can issue a stop-work order, and ignoring it is a misdemeanor. Other violations of the flood provisions draw a $500 civil citation per day under Section 4.4's general enforcement schedule until the property is brought into compliance.

Sources & Official References

Other rules in Alamance County

All Alamance County rules

Compare Alamance County to another location·View the North Carolina environmental rules overview

Get notified when Flood Zones in Alamance County, NC changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.