Residential fences in Fresno are capped at 6 feet in side and rear yards, 3 feet in front yards, and must stay within the corner sight triangle at 3 feet. Material rules in FMC §15-2019 require finished materials facing the street and prohibit barbed wire, razor wire, and electric fencing in residential zones.
Fresno Municipal Code Chapter 15 (Development Code) regulates fence location, height, and materials. Maximum height is 6 feet in side and rear yards, 3 feet in front yards, and 3 feet within a corner sight triangle that extends 15 feet from driveways and 25 feet from street intersections. Finished (good) side of the fence must face the street or adjacent property. Prohibited residential materials include barbed wire, razor wire, sheet metal, salvage materials, and electric fencing. Permitted materials include wood, vinyl, masonry, wrought iron, chain link with slats, and composite. Commercial and industrial zones may use chain link at greater heights with additional security features. Engineered walls over 7 feet or any retaining wall over 4 feet need permits. Pool barrier fences have separate H&S §115920 requirements. HOA rules in many Fresno subdivisions impose stricter aesthetic standards and may require specific colors or materials; HOA rules apply in addition to city code.
Specific penalty amounts for this ordinance are not published in a publicly accessible fine schedule. Contact Fresno code enforcement directly for current fines, enforcement procedures, and hearing options.
Other ordinances people look up for this city. Green dot = verified primary-source excerpt.
Fresno, CA
Fresno uses a receiving-zone dBA schedule in FMC §10-105. Residential properties are capped at 60 dBA from 7 AM to 10 PM and 50 dBA from 10 PM to 7 AM. Comme...
Fresno, CA
Outdoor music events in Fresno require either compliance with the FMC §10-105 residential dBA caps (60 day / 50 night) or a noise variance permit under FMC §...
Fresno, CA
Fresno does not impose a citywide ban on gas-powered leaf blowers, but operation is restricted under the general noise nuisance provisions of FMC Chapter 10....
Fresno, CA
Industrial noise in Fresno is capped by FMC §10-105 receiving-zone dBA limits: industrial zones allow up to 75 dBA at the property line, while any industrial...
Fresno, CA
Fresno requires all residential parking to be on an approved paved surface. FMC §15-2007 prohibits parking on lawns or unpaved areas in the front setback. Ve...
Fresno, CA
Fresno follows California CALGreen Tier 1 EV charging requirements for new residential and non-residential construction and allows single-family EV charger i...
Side-by-side rule comparisons with other cities in Fresno County.
See how other cities in Fresno County handle fence requirements.
See how Fresno's fence requirements rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.