Skip to main content
CityRuleLookup

Collier County, FL Fence Regulations: Height Limits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified July 2026

Key Facts

Applies to
Nonresidential next to residential
Contiguous wall height
6 to 8 feet
Contiguous setback
At least 6 feet
Opposite across street
4-foot wall
Wall material
Masonry or concrete

Summary

When a nonresidential development abuts or faces a residential district, Collier County requires the nonresidential owner to build a masonry or concrete wall or fence. Contiguous walls must be 6 to 8 feet tall and set back at least 6 feet from the residential district.

These county ordinances apply to unincorporated areas of Collier County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

Whenever a nonresidential development lies contiguous to or opposite a residentially zoned district, a masonry wall, concrete or pre-fabricated concrete wall and/or fence shall be constructed on the nonresidential property. If located on a contiguous property, then height shall be 6 feet to 8 feet and placement shall be no less than 6 feet from the residentially zoned district.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 126 | Land Development Code: Supplement 33).

Full Breakdown

LDC Section 5.03.02 H mandates a buffer wall between residential and nonresidential development. If the nonresidential parcel is contiguous to a residentially zoned district, a masonry, concrete, or pre-fabricated concrete wall and/or fence 6 to 8 feet tall must be built at least 6 feet from the residential district line. If the property is opposite a residential district across a local street or platted alley, height is 4 feet, set back a minimum of 3 feet from the right-of-way landscape buffer. All fences must present a finished side outward and use approved materials. Single-family residential fences are not subject to these buffer-wall standards.

Violations & Fines

Failure to install a required buffer wall can hold up site development plan approval and certificate of occupancy, and prompt Code Enforcement action under LDC 5.03.02 H.

Frequently Asked Questions

Who must build the buffer wall?
The nonresidential property owner. LDC 5.03.02 H requires the wall be constructed on the nonresidential property when it lies contiguous to or opposite a residentially zoned district.
Does this apply to my house?
No. The buffer-wall requirement targets nonresidential (commercial, industrial) development. Ordinary single-family residential fences follow the standard 5.03.02 height and design rules instead.

Sources & Official References

Other rules in Collier County

All Collier County rules

How Collier County compares: Cities That Allow the Tallest Residential Fences·Florida rules heatmap·Compare Collier County to another location·View the Florida fence regulations overview

Get notified when Height Limits in Collier County, FL changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.