Alpine, TX Fence Regulations: Fence Permit Requirements (2026)
Key Facts
- Permit scope
- All fencing installed, altered, repaired, or replaced
- Authority
- § 18-37(3) amends IRC Section R105.2
- Front yard height
- Not over four feet
- Side and back yard height
- Not over eight feet
- Corner sight triangle
- 15-foot × 15-foot, 2½ to ten feet clear
- Penalty
- Class C misdemeanor, fine up to $2000.00 (§ 18-39)
Summary
In Alpine, a permit is required for all fencing installed, altered, repaired, or replaced, because the city deleted the fence exemption from the residential code's list of work exempt from permit. Appendix C then caps fences, walls and hedges at four feet along the front yard and eight feet in the designated side and back yard.
Section R105.2 (Work exempt from permit) is amended by deleting number two under "Building" in its entirety. (Reason: this amendment allows a permit requirement for all fencing installed, altered, repaired, or replaced within the City of Alpine.) ... Fences, walls and hedges —Notwithstanding other provisions of this ordinance, fences, walls and hedges may be permitted in any permissible yard, provided that no fence, wall or hedge along the sides or front edge of any front yard, up to the front of the house or structure, shall not be over four feet in height. Fences, walls and hedges may be permitted in any permissible yard, provided that no fence shall be over eight feet in height in the designated side yard (behind the front door of the primary structure) and designated back yard.
Full Breakdown
Alpine's fence permit rule comes from the building code amendments rather than from a stand-alone fence chapter. Section 18-36 adopts the 2021 International Residential Code, and Section 18-37(3) amends its Section R105.2 (Work exempt from permit) by deleting number two under "Building" in its entirety. The ordinance prints the reason in the same paragraph: the amendment allows a permit requirement for all fencing installed, altered, repaired, or replaced within the City of Alpine. That wording reaches new fences, repairs and replacements alike.
The permit is obtained by applying to the building official, the same officer who handles every other permit under Section 18-2, with fees set under Section 18-3 by Appendix B: Building Services Fees.
Height is a separate matter handled by the zoning ordinance. Appendix C, Section 6, item 2 (Fences, walls and hedges) allows them in any permissible yard but caps any fence, wall or hedge along the sides or front edge of any front yard, up to the front of the house or structure, at four feet in height. In the designated side yard, which is behind the front door of the primary structure, and in the designated back yard, no fence can be over eight feet in height. A related corner lot rule in Appendix C, Section 6, item 1 keeps anything from being erected, placed, planted or allowed to grow so as to materially impede vision between a height of 2½ and ten feet above the centerline grades of the intersecting streets within the 15-foot × 15-foot sight triangle measured from the point of intersection along the owner's property lines. A fence design has to clear both the permit and those zoning limits.
Violations & Fines
Section 18-39 makes a violation of Article II of Chapter 18, which contains the Section 18-37 amendment requiring the fence permit, a class C misdemeanor with a fine not to exceed $2000.00 on conviction. Each day the violation continues is a separate and distinct offense, and a culpable mental state does not have to be proved.
Frequently Asked Questions
Does a fence need a permit in Alpine?
How tall can a fence be in an Alpine front yard?
How tall can a backyard fence be in Alpine?
Do corner lots have extra fence limits in Alpine?
Sources & Official References
Other rules in Alpine
Texas rules heatmap·Compare Alpine to another location·View the Texas fence regulations overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.