Skip to main content
CityRuleLookup

Annapolis, MD Fire Regulations: Propane Storage (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Standard adopted
NFPA 58, 2020 Edition (LP-Gas Code)
Enforcing agency
Dept. of Planning and Zoning
Pressure test minimum
1.5x working pressure, at least 30 psi
Violation penalty
Municipal infraction, fine set by Council
Last amended
March 11, 2024 (Ord. O-1-24)

Summary

Annapolis regulates residential propane and LP-gas installations through NFPA 58 (2020 Edition), which the city has formally adopted by ordinance, plus local amendments requiring pressure testing and accessible shutoff valves, enforced by the Department of Planning and Zoning.

NFPA 54/ANSIZ 223.1, National Fuel Gas Code, 2021 Edition, and NFPA 58, Liquefied Petroleum Gas Code, 2020 Edition, as published by the National Fire Protection Association, copies of which are on file in the Department of Planning and Zoning, are adopted as the Code for the Installation of Fuel Gas Piping Systems, Fuel Gas Utilization Equipment, and Related Accessories for the City of Annapolis with the following amendment:

A.In multifamily structures, each dwelling unit shall have an accessible valve outside the dwelling to shut off the gas supply to the dwelling unit without stopping the supply in other dwellings, unless otherwise approved by the Code Official.B.Pressure testing of new or repaired gas piping shall be tested to 1.5 times the proposed working pressure of the system and not less than 30 psi. (Ord. O-38-01 § 1 (part): Ord. O-55-95 § 1 (part): prior code § 6-38)

(Ord. No. O-21-10 Amended, § I, 11-8-2010; Ord. No. O-23-12, § I, 7-23-2012; Ord. No. O-12-16 Amended, § I, 5-23-2016; Ord. No. O-38-20, § I, 11-9-2020; Ord. No. O-1-24, § I, 3-11-2024)

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 2025 Update 2).

Full Breakdown

The City of Annapolis has adopted NFPA 58, the 2020 Liquefied Petroleum Gas Code, as its governing standard for propane storage and installation, covering container placement, clearances and equipment for LP-gas systems citywide (§ 17.24.040). The city layered on its own amendments: multifamily buildings need an accessible exterior shutoff valve for each unit, and new or repaired gas piping must be pressure-tested to 1.5 times working pressure and at least 30 psi. The Director of Planning and Zoning enforces the chapter and can order unsafe equipment removed from service. Most recently amended by Ordinance O-1-24 on March 11, 2024.

Violations & Fines

Violating the Gas Code, including its NFPA 58 propane storage provisions, is a municipal infraction carrying a fine set by City Council resolution; the Director may also disconnect dangerous equipment immediately without notice.

Frequently Asked Questions

Does Annapolis have its own rules for propane tank installation?
Yes. The city has adopted NFPA 58 (2020 Edition) as its Liquefied Petroleum Gas Code by ordinance, plus local amendments on shutoff valves and pressure testing, enforced by the Department of Planning and Zoning.
What happens if a propane installation violates the code?
It's a municipal infraction with a fine set by City Council resolution, and the Director of Planning and Zoning can order dangerous equipment disconnected immediately without prior notice.

Sources & Official References

Other rules in Annapolis

All Annapolis rules

Compare Annapolis to another location·View the Maryland fire regulations overview

Get notified when Propane Storage in Annapolis, MD changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.