Skip to main content
CityRuleLookup

Clark County, WA Fire Regulations: Smoke Detectors (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified July 2026

Key Facts

Statute
RCW 43.44.110
Install responsibility
Property owner
Maintenance / batteries
Tenant
Placement
Every bedroom + each level
Base fine
Up to $200

Summary

Washington law (RCW 43.44.110) requires smoke detection devices in all dwelling units. The owner is responsible for installation; tenants maintain them, including batteries. Alarms are required in every bedroom, outside sleeping areas and on each level. Carbon-monoxide alarms are also required.

These county ordinances apply to unincorporated areas of Clark County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

Installation of smoke detection devices shall be the responsibility of the owner. Maintenance of smoke detection devices, including the replacement of batteries where required for the proper operation of the smoke detection device, shall be the responsibility of the tenant. Any owner, seller, or tenant failing to comply with this section shall be punished by a fine of not more than two hundred dollars.

Full Breakdown

Clark County follows Washington's statewide requirement rather than a separate county rule. Under RCW 43.44.110, smoke detection devices must be installed inside all dwelling units, designed and installed per standards set by the state fire marshal. Installation is the owner's responsibility; maintenance, including battery replacement, is the tenant's. Rental units must have working alarms at move-in. The state residential building code (adopting the IRC via RCW 19.27) requires alarms in each sleeping room, outside each sleeping area, and on every level. Carbon-monoxide alarms are separately required in residences under RCW 19.27.530.

Violations & Fines

Failing to comply is punishable by a fine of not more than $200; where an owner's failure results in fire injury or damage, the penalty rises to $5,000.

Frequently Asked Questions

Who is responsible for smoke alarm batteries in a rental?
The tenant. Under RCW 43.44.110 the owner installs the devices, but the tenant maintains them, including replacing batteries as specified by the manufacturer.
Are carbon-monoxide alarms required too?
Yes. Carbon-monoxide alarms are required in residential buildings statewide under RCW 19.27.530, in addition to smoke alarms.

Sources & Official References

Other rules in Clark County

All Clark County rules

Compare Clark County to another location·View the Washington fire regulations overview

Get notified when Smoke Detectors in Clark County, WA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Smoke Detectors in Cities Across Clark County