Skip to main content
CityRuleLookup

Roof Standards

Hurricane Preparedness

Wind-resistant roofing requirements including strap attachments, material ratings, and inspection requirements for hurricane-prone areas.

93% moderate3% strict(29 locations)

How Roof Standards Rules Differ by Place

29 places covered1 strict27 moderate

Homestead, FL: Homestead HVHZ Roof Standards

Heavy Restrictions

Homestead's HVHZ building code requires roofing systems to withstand wind speeds exceeding 170 mph. Roofing materials must carry Miami-Dade County NOA approval. Installation must…

Huntsville, AL: Huntsville Roof Wind Design Standard

Some Restrictions

Huntsville's building code sets a 90 mph basic wind design speed for one- and two-family homes, the local benchmark builders must meet when engineering roof framing and coverings for…

Boca Raton, FL: Boca Raton Roof Wind-Resistance Design Rule

Some Restrictions

Boca Raton will not approve a roof permit until the construction documents spell out the roofing system, materials, fastening pattern, flashing, and wind resistance rating for that…

Brevard County, FL: Roof Inspection Requirements in Brevard County

Some Restrictions

Brevard County requires a mandatory roofing inspection before a certificate of occupancy issues, with two separate inspections, dry-in and final, for tile, slate, and similar roof…

Jacksonville, FL: Jacksonville Roof Wind Speed Standards

Some Restrictions

Jacksonville sets local wind-speed design zones under the Florida Building Code, requiring roofs east of a mapped demarcation line to withstand higher wind speeds than the west side.

Lee County, FL: Roof and Wind-Borne Debris Rules in Lee County

Some Restrictions

Lee County's own Wind-Borne Debris Region and Basic Wind Speed Map, adopted under Section 6-112, sets local wind-speed zones tied to Florida Building Code Figures 1609A-C that decide…