Skip to main content

Alpine, TX Noise Ordinances: Construction Hours (2026)

Significant Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified November 2026

Construction hours in Alpine, TX, sometimes called construction noise rules or contractor work-hour ordinances, set when contractors can run power tools, hammers, and heavy equipment.

Key Facts

Barred hours
10:00 p.m. to 7:00 a.m., any day
Covered work
slab pours, demolition, power tools, yard tools, lawnmowers
Zones
R-1 to R-4 and C-1, C-1a, C-2, C-2a
Residential permit season
Memorial Day through Labor Day only
Permit window
5:00 a.m. to 12:00 midnight on the requested day
Neighbor notice
at least ten days in advance

Summary

Alpine prohibits pouring a slab, demolishing a building and running power tools or yard tools from 10:00 p.m. until 7:00 a.m. on residential (R-1 to R-4) and commercial (C-1, C-1a, C-2, C-2a) property unless a Sec. 26-68 permit was obtained first. Residential permits are issued only from Memorial Day through Labor Day.

(3) The pouring of a slab, demolishing a building, or utilizing any yard tools, mechanically powered saw, drill, sander, router, grinder, lawn or garden tool, lawnmower, or any other similar device, commercial or industrial power tools is prohibited from 10:00 p.m. on any day until 7:00 a.m. the following day on any residentially zoned property (R-1, R-2, R-3, R-4) or commercially zoned property (C- 1, C-1a, C-2, C-2a) on any day without first having obtained a permit issued in accordance with section 26-68 for such work.

Full Breakdown

Section 26-62(a)(3) of the Alpine noise article covers the work itself, not just the sound level. It names the pouring of a slab, demolishing a building, and using yard tools, any mechanically powered saw, drill, sander, router, grinder, lawn or garden tool, lawnmower, commercial or industrial power tools, or any similar device. The bar runs from 10:00 p.m. on any day until 7:00 a.m. the following day and applies on residentially zoned property (R-1, R-2, R-3, R-4) and commercially zoned property (C-1, C-1a, C-2, C-2a). The only way around it is a permit issued under Sec. 26-68.

The Sec. 26-68 permit has tight edges. Commercially zoned properties can be permitted at any time of the year, but residentially zoned properties can be permitted only from Memorial Day through Labor Day of each year. The permit is valid for the requested day between 5:00 a.m. and 12:00 midnight. It is not issued to the same or any other person for the same location more than twice, nor for more than two consecutive days, during any 30-day period. The applicant applies to the city police department or the office the city manager designates and pays an administrative fee for the cost of issuing the permit, or files a sworn statement of inability to pay the fee.

Before a permit issues, the applicant must prove notice to everyone who occupies or owns adjacent properties, describing the work and its expected duration. Notice is sent as the city zoning ordinance prescribes, or hand delivered, at least ten days in advance. The application lists the date and hours requested, the applicant and the person in charge of the work, a description and diagram of the property, the address and location where equipment will be used, and the type of equipment. The permit must be posted on site in a clearly visible location, and a property with two convictions or deferrals within any 12-month period is barred from a permit for one year after the latest conviction.

Section 26-69 exempts emergency work, work by public utilities and public works, and lawful manufacturing or industrial activity on industrially zoned property.

Violations & Fines

A violation of the noise article is punished under Sec. 26-70 by a fine of not more than the amount defined in Sec. 1-11. Following notification by a city police officer or code enforcement officer, each 15 minutes in which the violation occurs is a separate offense. The code declares these violations health and safety violations for setting fines, and no culpable mental state need be pleaded or proved.

Frequently Asked Questions

Can I run a lawnmower or saw at 10:30 p.m. in Alpine?
Not without a permit. Sec. 26-62(a)(3) prohibits yard tools, mechanically powered saws, drills, sanders, routers, grinders, lawn or garden tools and lawnmowers from 10:00 p.m. until 7:00 a.m. on residential and listed commercial property unless a Sec. 26-68 permit was obtained first.
Can I get a night work permit for a house in January?
No. Under Sec. 26-68(b), permits for residentially zoned properties (R-1, R-2, R-3, R-4) are issued only during the period from Memorial Day through Labor Day of each year. Commercially zoned properties (C-1, C-1a, C-2, C-2a) can be permitted at any time of the year.
How many permits can one address get?
Sec. 26-68(f) bars issuing permits to the same or any other person for the same location more than twice, or for more than two consecutive days, during any 30-day period. Each permit is valid for the requested day between 5:00 a.m. and 12:00 midnight, and it must be posted on site.
Do my neighbors have to be told?
Yes. Sec. 26-68(g) requires proof that the applicant notified everyone who occupies or owns adjacent properties of the work and its expected duration. Notice is sent as the city zoning ordinance prescribes, or hand delivered, at least ten days in advance of the proposed activity.

Sources & Official References

Other rules in Alpine

All Alpine rules

Texas rules heatmap·Compare Alpine to another location·View the Texas noise ordinances overview

Get notified when Construction Hours in Alpine, TX changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.