Butte County, CA Noise Ordinances: Construction Hours (2026)
Construction hours in Butte County, CA, sometimes called construction noise rules or contractor work-hour ordinances, set when contractors can run power tools, hammers, and heavy equipment.
Key Facts
- Blocked weekday window
- Sunset to sunrise
- Friday-Saturday block
- 6 p.m. Fri to 8 a.m. Sat
- Saturday-Sunday block
- 6 p.m. Sat to 10 a.m. Sun
- Sunday block
- After 6 p.m. all day
- Covered radius
- Within 1,000 ft of residences
- Enforcing department
- Development Services
- Violation class
- Infraction under Sec. 41-2
Summary
Butte County bars construction, repair, remodeling, demolition, paving or grading noise within 1,000 feet of residential uses from sunset to sunrise on weekdays, after 6 p.m. Friday through 8 a.m. Saturday, after 6 p.m. Saturday through 10 a.m. Sunday, and after 6 p.m. Sunday under Code of Ordinances Sec. 41A-9(f).
Noise sources associated with construction, repair, remodeling, demolition, paving or grading of any real property or public works project located within one thousand (1,000) feet of residential uses, provided said activities do not take place between the following hours: • Sunset to sunrise on weekdays and non-holidays; • Friday commencing at 6:00 p.m. through and including 8:00 a.m. on Saturday, as well as not before 8:00 a.m. on holidays; • Saturday commencing at 6:00 p.m. through and including 10:00 a.m. on Sunday; and, • Sunday after the hour of 6:00 p.m.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 61).
Full Breakdown
Section 41A-9 of the Noise Control Ordinance exempts most construction noise from the county's exterior and interior decibel standards, but only during the daytime and evening hours the same section defines. Subsection (f) covers "noise sources associated with construction, repair, remodeling, demolition, paving or grading of any real property or public works project located within one thousand (1,000) feet of residential uses," and the exemption does not apply, meaning the underlying decibel standards of Sec. 41A-7 (exterior) and Sec. m. The section carves out one narrow field exception: if an unforeseen or unavoidable condition arises mid-project and a specific phase must be finished, the contractor or owner may keep operating machinery into the blocked hours to complete that phase without jeopardizing inspection acceptance, avoiding undue financial hardship in the process.
Enforcement runs through Sec. 41A-18: the Department of Development Services acts on a received complaint, investigates whether measured dBA levels exceed the applicable standard during the barred hours, and if a violation is found, serves written notice specifying the section violated, the readings taken, and the time and place of detection, with an order to correct within a set deadline.
Violations & Fines
Failure to correct after written notice triggers the Chapter 41 enforcement process; conviction is an infraction under Butte County Code Sec. 41-2. Investigation costs may be recovered from a violator found in violation under Sec. 41A-19; unfounded first complaints are investigated at County expense.
Frequently Asked Questions
Can a Butte County contractor ever work past the blocked construction hours?
What hours can construction noise run near homes in unincorporated Butte County?
Who enforces Butte County's construction noise hours?
Sources & Official References
Other rules in Butte County
How Butte County compares: Cities with the Strictest Construction Hours·California rules heatmap·Compare Butte County to another location·View the California noise ordinances overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.