Skip to main content

Alpine, TX Outdoor Lighting: Billboard Lighting (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified November 2026

Key Facts

Curfew
11:00 p.m. or one hour after business closes
External lighting
Top-down only, fully shielded luminaires
Internal brightness
Not to exceed 100 nits
Size limit
200 square feet luminous surface area
Off-premises spacing
1,000 feet from other off-premises signs and residential areas
Plan review
Building official decides within 30 days

Summary

Alpine requires illuminated signs to go dark at 11:00 p.m. or within one hour of closing, whichever occurs later. Externally lit signs must be lit only from the top with fully shielded fixtures, internal illumination cannot exceed 100 nits, and off-premises signs must stay 1,000 feet apart and 1,000 feet from a residential area.

All illuminated signs shall be extinguished at 11:00 p.m. or within one hour of the end of normal business hours, whichever occurs later. ... (b) Top-down lighting. Externally illuminated signs shall be lit only from the top of the sign, with fully shielded luminaires designed and installed to prevent light from spilling beyond the physical edges of the sign. ... (3) The internal illumination, between sunset and sunrise, is to be the lowest intensity needed to allow the sign to be visible for up to one-half mile from its installation and shall not exceed 100 nits. (d) Size limit. The luminous surface area of an individual sign shall not exceed 200 square feet. ... (f) Permitted location. (1) Off-premises signs shall not be placed within 1,000 feet of another off-premises sign on the same side of an arterial street or highway, regardless of face orientation, or within 1,000 feet of a residential area.

Full Breakdown

Sign lighting in Alpine falls under Section 18-239 of the outdoor lighting article, Chapter 18, Article VIII, which was adopted by Ordinance No. 2021-05-01 on 7-6-21. Section 18-239(a) allows permanent signs to be non-illuminated, internally illuminated, internal indirect (halo) or lit by external indirect illumination unless otherwise specified, requires every illuminated sign to meet the article's correlated color temperature requirements, and sets the curfew at 11:00 p.m. or within one hour of the end of normal business hours, whichever occurs later. Section 18-239(b) requires top-down lighting for externally lit signs, with fully shielded luminaires installed to keep light from spilling beyond the physical edges of the sign.

Internally illuminated signs carry more conditions. Under Section 18-239(c), the sign must have an opaque background with translucent letters and symbols, or a colored background with lighter letters and symbols. The lit portion cannot be white, cream, off-white, light tan, yellow or any light color unless it is part of a registered logo with no darker alternate version, and light tones in a logo cannot be more than 33 percent of the total sign area permitted. The 100 nit cap applies between sunset and sunrise. Section 18-239(d) limits the luminous surface area of an individual sign to 200 square feet.

The sign chapter adds to this. Section 78-3(a)(15) prohibits signs illuminated by floodlights or spotlights unless the light is indirect and shielded so it is not directly visible from the public right-of-way or from a residential area within 40 feet, and Section 78-3 requires shielding on illuminated signs within 40 feet of residential zones. Billboards are listed as prohibited in Section 78-3(a)(8), with the location rules limiting a billboard to the extraterritorial jurisdiction. Lighting plans go to the city building official, who approves or rejects a plan within 30 days of submission.

Violations & Fines

Under Section 18-237(e), operating sign lighting in violation of the article is a class A misdemeanor, each day is a separate offense, and an owner can be issued a warning notice with 30 days to submit a lighting plan. After 60 days without compliance the fine is $50.00 for each day unless the city council grants a waiver. A violation causing light trespass is declared a public nuisance.

Frequently Asked Questions

What time must sign lights go off in Alpine?
Section 18-239(a) requires all illuminated signs to be extinguished at 11:00 p.m. or within one hour of the end of normal business hours, whichever occurs later. The same subsection requires all sign illumination to comply with the correlated color temperature requirements of the article.
How can an outside-lit sign be lit?
Section 18-239(b) says externally illuminated signs shall be lit only from the top of the sign. The luminaires must be fully shielded and designed and installed to prevent light from spilling beyond the physical edges of the sign, so floodlights aimed upward or sideways do not meet the standard.
How bright can an internally lit sign be?
Section 18-239(c)(3) says internal illumination between sunset and sunrise is to be the lowest intensity needed to let the sign be visible for up to one-half mile from its installation and shall not exceed 100 nits. Section 18-239(c)(2) also restricts light colors in the illuminated portion.
How far apart must off-premises signs be in Alpine?
Section 18-239(f)(1) says off-premises signs shall not be placed within 1,000 feet of another off-premises sign on the same side of an arterial street or highway, regardless of face orientation, or within 1,000 feet of a residential area. Section 78-3 prints a separate 150 foot spacing line for off-premises signs.

Sources & Official References

Other rules in Alpine

All Alpine rules

Texas rules heatmap·Compare Alpine to another location·View the Texas outdoor lighting overview

Get notified when Billboard Lighting in Alpine, TX changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.