Skip to main content
CityRuleLookup

Maricopa County, AZ Sign Regulations: Freeway-Facing Signs (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified August 2026

Key Facts

Zoning districts allowed
C-S and C-2 only
Max height
65 ft (80 ft w/ antennas)
Height-to-width ratio
2.5-to-1 maximum
Property line setback
20 ft minimum at base
Landscape buffer
4 ft beyond sign base

Summary

In unincorporated Maricopa County, freeway-facing pylon signs are limited to C-S and C-2 zoning districts, capped at 65 feet (80 feet with cellular antennas), and must sit back at least 20 feet from any property line.

City-specific rules exist: Scottsdale, Gilbert, Peoria, Mesa, Phoenix, Glendale, Goodyear, and Tempe have their own freeway-facing signs rules that differ from Maricopa County's county-level regulations. If you live in one of those cities, check the city-specific page instead.

Freeway Pylon Signs shall be permitted in the C-S and C-2 Zoning Districts only... Shall not exceed sixty-five (65) feet in height unless designed in such a way as to accommodate Wireless cellular panel antennas in which case sign height shall not exceed eighty (80) feet... Shall provide at the base a setback of not fewer than twenty (20) feet from any property line.

Full Breakdown

Maricopa County Zoning Ordinance section 1103.2.5 permits freeway pylon signs only in the C-S and C-2 zoning districts within unincorporated Maricopa County. Height is capped at 65 feet, or up to 80 feet if the structure is built to carry wireless cellular panel antennas, with associated ground equipment fully screened and capped at 600 square feet. The sign face cannot exceed a 2.5-to-1 height-to-width ratio or more than 50 percent of the structure's gross face area per side, and the sign does not count toward a property's normal freestanding or wall sign allowance. The base must sit back at least 20 feet from any property line, with 4 feet of landscaping around the structure's widest point.

Violations & Fines

Erecting a freeway pylon sign outside C-S or C-2 zoning, exceeding the 65 or 80-foot height cap, or skipping the required 20-foot setback and landscape buffer is a zoning code violation the County Zoning Inspector can cite and require corrected.

Frequently Asked Questions

Can a freeway pylon sign go in any commercial zone?
No. Maricopa County limits freeway pylon signs to C-S and C-2 zoning districts under MCZO section 1103.2.5.
How tall can a freeway pylon sign be?
Up to 65 feet, or 80 feet if the sign is designed to carry wireless cellular panel antennas with screened equipment.

Sources & Official References

Other rules in Maricopa County

All Maricopa County rules

Compare Maricopa County to another location·View the Arizona sign regulations overview

Get notified when Freeway-Facing Signs in Maricopa County, AZ changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Freeway-Facing Signs in Cities Across Maricopa County