Skip to main content

Murray, KY Sign Regulations: Window Signs (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified November 2026

Key Facts

Window coverage cap
25% of the window area
Permit
None for exempt commercial window signage
Window area measured
Glass or glazed elements only
Illuminated signs
Prohibited within fifty (50) feet of a residential district
Flashing or blinking signs
Prohibited at all times
Appeal
30 days to the Board of Zoning Adjustments

Summary

Murray exempts window signs on commercial businesses from the sign permit but caps them at 25% of the window area they are affixed to. Window area counts only the glass, not frames or mullions, and the signage still has to avoid flashing, blocking exits or breaking the other prohibitions in § 156.050.

(a) The following signs or sign-like devices are allowed in all zoning districts without a permit, except where stated otherwise. Signs subject to this division shall conform to the requirements specified below: ... 4. Commercial business window signage shall not exceed 25% of the window area to which they are affixed. Refer to division (K) for rules of measurement; ... (6) Window area. The area of a window includes only the glass or glazed elements of the window. Frames, mullions, and similar features are not counted as part of the window area.

Full Breakdown

Division (H)(1)(a)4 of § 156.050 lists commercial business window signage among the signs allowed in all zoning districts without a permit, on the condition that it not exceed 25% of the window area to which it is affixed. The cap is measured against the window the signage is attached to, so a storefront with several panes is checked pane by pane against the window each sign sits on.

Division (K)(6) defines window area as only the glass or glazed elements of the window. Frames, mullions and similar features are not counted. Lettering or logos applied directly to the glass are measured under division (K)(2), which takes the area of the smallest geometric figure that can be drawn around the individual letters or elements and treats signs made of individual letters as one sign.

The permit exemption does not switch off the prohibitions in division (H)(2). Flashing or blinking signs are banned at all times in all zones. Signs that obstruct any fire escape, required exit, window or door opening used as a means of egress are banned. Illuminated signs within fifty (50) feet of any residential zoning district are prohibited, and signs that become nuisances by light reflection, glare, animation, flashing or intensity of illumination are prohibited when they unduly disturb surrounding properties or the public.

A sign installed in a building or enclosed space and not legible from the public right-of-way or from other property is a separate exemption under division (H)(1)(a)10. Under the content-neutrality clause in division (A)(4), the Zoning Official reviews size, height and location, not the message, except that obscene or pornographic subjects are excluded.

Violations & Fines

Window signage over the 25% cap violates § 156.050 and is enforced under Chapter 40 by the Code Enforcement Board. The § 40.15 zoning ordinance schedule is $150 for a first uncontested offense, $200 for a second and $500 for each additional, with $200 to $500 possible after a contested hearing. Each day a violation continues is a separate violation, and anyone aggrieved by a Zoning Official decision can appeal to the Board of Zoning Adjustments within 30 days.

Frequently Asked Questions

Do I need a permit for window signs in Murray?
Not for commercial business window signage that stays within the cap. Section 156.050(H)(1)(a) allows it in all zoning districts without a permit, except where stated otherwise. Signs outside the exempt list, such as freestanding or wall signs, still need a permit from the Zoning Official before installation, with fees set in division (B)(12).
How does Murray measure window area?
Division (K)(6) counts only the glass or glazed elements of the window. Frames, mullions and similar features are not part of the window area. Individual letters or elements applied to the glass are measured under division (K)(2) by the smallest geometric figure that can be drawn around them.
Can a window sign light up or flash in Murray?
Flashing or blinking signs are prohibited at all times in all zones under division (H)(2)(e), and illuminated signs within fifty (50) feet of any residential zoning district are prohibited by division (H)(2)(g). A neon or LED window sign has to clear both rules, and the 25% cap still applies.

Sources & Official References

Other rules in Murray

All Murray rules

Compare Murray to another location·View the Kentucky sign regulations overview

Get notified when Window Signs in Murray, KY changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.