Skip to main content
CityRuleLookup

Kentucky Statewide Rule

Kentucky Propane Storage State Fire Marshal Standards

Heavy RestrictionsApplies statewide across Kentucky (2026)

Key Facts

Adopted Code
NFPA 58
Statute
KRS 234.180
Regulation
815 KAR 10:060
Permit Authority
State Fire Marshal
Installer Certification
State required
Last verified: August 21, 2026Source: Commonwealth of Kentucky

Summary

Kentucky State Fire Marshal regulates LP-gas storage statewide under KRS 234.180 and 815 KAR 10:060, requiring NFPA 58 compliance and permits for installation of all flammable and combustible storage vessels.

(1) For plants storing liquefied petroleum gases, and used for the dispensing of liquefied petroleum gases in liquid state into container or containers, for resale, plans shall be submitted, in duplicate, to the Department of Housing, Buildings and Construction, and shall be approved by the department before construction is started. Plans so submitted shall show the following information as a minimum: (a) The name and address of the owner, and the name and purpose of the plant proposed; (b) Location of the proposed plant in relation to the nearest city, highways, railroads, and built up areas; (c) A plot plan showing dimensions of the area proposed to be used for the plant, distances to the nearest property lines and the location and construction of any buildings which might affect the distances required under regulations adopted by the commissioner of housing, buildings, and construction;

Source: Commonwealth of KentuckyView official code

Full Breakdown

Under KRS 234.180 and 815 KAR 10:060, the Kentucky Standards of Safety adopt NFPA 58 (Liquefied Petroleum Gas Code) as the statewide standard for all LP-gas (propane) storage, handling, and equipment installation. The State Fire Marshal's Hazardous Materials Section issues required permits for installation or modification of LP-gas storage containers. Container distance setbacks, transfer-station construction, tank sizing, and installer certification are all governed at the state level. Local governments may not adopt LP-gas storage standards that conflict with the state code, though they may enforce the state standards through local fire departments.

Violations & Penalties

Installing LP-gas containers without a permit, failing to meet NFPA 58 setbacks, or operating without certified installers can result in stop-work orders, fines, and removal orders by the State Fire Marshal.

Frequently Asked Questions

Do I need a permit for a residential propane tank?
Permits from the State Fire Marshal are required for LP-gas storage vessel installations. Most residential installations are handled by certified dealers who obtain the permit.
Can my city require different setbacks than NFPA 58?
No. Kentucky has adopted uniform statewide standards for LP-gas storage. Local governments must follow NFPA 58 setbacks as adopted in 815 KAR 10:060.
Who can install propane tanks in Kentucky?
Only certified LP-gas installers may perform installations. The State Fire Marshal certifies installers and inspects compliance with NFPA 58 standards statewide.

Sources

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.