Salt Lake County, UT Tree Protection: Parkway Planting (2026)
Key Facts
- Street tree ratio
- 1 tree per 25 linear ft
- Includes
- Required park strips
- Exempt
- Manufacturing/warehouse uses
- Governing chapter
- SLCo Code Ch. 19.77
Summary
Landscaped areas along a street in Salt Lake County, including park strips, must include one tree for every 25 linear feet of street frontage.
Plant Quantities. Regardless of depth, all landscape areas adjacent to a street (including required park strips) shall be planted and maintained with the following:a.One and one-fourth trees per one thousand sq. ft. of the ground or main floor level of nonresidential buildings in commercial zones.b.Two trees per one thousand sq. ft. of the ground or main floor level of buildings in manufacturing zones.c.One tree per twenty-five lineal feet of street frontage (not applicable to manufacturing and warehouse uses).d.One shrub per four lineal feet of building foundation (may be grouped).e.Any combination of other live plant materials and decorative features consistent with the requirements of this chapter.B.Interior Side and Rear Yards. The side and rear yard areas required by this title shall be landscaped and maintained as set forth in this chapter. Overhanging or cantilevered structures may not encroach upon such areas.C.Buffer Areas Between Nonresidential and Residential Land Uses. A landscaped buffer area not less than twenty feet wide shall be required between nonresidential and residential uses. A minimum of one tree for every twenty-five linear feet of landscape buffer is required. Either a linear or cluster arrangement of trees is allowed so long as the spacing of provided trees adequately screens the nonresidential use from the adjacent residential area. If a linear arrangement of trees is provided, tree spacing shall not exceed twenty-five feet on center.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 49).
Full Breakdown
The county's landscape yard standards require any landscaped area next to a street, including required park strips, to be planted with one tree per 25 lineal feet of street frontage, on top of separate per-square-foot tree ratios for commercial and manufacturing building floor area. The rule doesn't apply to manufacturing and warehouse uses, and it's part of the buffer and street-frontage landscaping required under Chapter 19.77.
Violations & Fines
A site plan that omits the required street-frontage tree count, or a park strip planted below the one-tree-per-25-feet standard, fails landscape plan review under Section 19.77.050(A)(2) and can be denied approval.
Frequently Asked Questions
How many street trees does Salt Lake County require along a frontage?
Does the park strip rule apply to warehouses?
Sources & Official References
Other rules in Salt Lake County
Compare Salt Lake County to another location·View the Utah tree protection overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.