Skip to main content
CityRuleLookup

Nashua, NH Building Safety: Plumbing Permits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Code adopted
International Plumbing Code, 2021 amendments
Enforcing agency
Department of Building Safety
Building sewer depth
36 in. septic / 48 in. other
Water heater temp
Min. 140°F; fixtures capped at 130°F
Permit required
Yes, before plumbing work begins

Summary

Nashua adopts the International Plumbing Code as its city Plumbing Code, administered by the Department of Building Safety, with local amendments covering fees, sewer depths, and water temperature limits.

A certain document and referenced code on file in the Department of Building Safety of the City of Nashua, New Hampshire, being marked and designated as the "International Plumbing Code," adopted as per the New Hampshire State Building Code per RSA 155-A and as published by the International Code Council, Inc., ... is hereby adopted as the Plumbing Code of the City of Nashua, in the State of New Hampshire, for the control of buildings and building systems, with any amendments prescribed in this article.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4805762; v29 updated 2026-02-10; through 02-10-2026).

Full Breakdown

Nashua adopts the International Plumbing Code, as amended under the New Hampshire State Building Code (RSA 155-A), as its Plumbing Code under Nashua Revised Ordinances § 105-16. Plumbing work requires a permit through the Department of Building Safety, with fees set by chapter under § 105-17(B). Local amendments require building sewers serving septic systems to run at least 36 inches deep (48 inches for other building sewers), cap tankless-water-heater and faucet temperatures at 130°F, and set a 140°F minimum for water heaters and indirect-fired storage tanks.

Violations & Fines

Violating the Plumbing Code or permit terms is enforced under NRO Chapter 74 and RSA 676:15-17-b, without limiting any other remedy available to the City at law or equity.

Frequently Asked Questions

Does Nashua require a plumbing permit?
Yes. Plumbing work in Nashua falls under the city's adopted International Plumbing Code (§ 105-16), administered by the Department of Building Safety, which issues permits and collects fees under Chapter 105.
What plumbing code does Nashua use?
Nashua adopts the International Plumbing Code as amended under the New Hampshire State Building Code (RSA 155-A), with local amendments to sewer depth, water-heater temperature, and fee provisions (§ 105-16, § 105-17).

Sources & Official References

Other rules in Nashua

All Nashua rules

Compare Nashua to another location·View the New Hampshire building safety overview

Get notified when Plumbing Permits in Nashua, NH changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.