Skip to main content
CityRuleLookup

Washington County, MD Building Setbacks & Zoning: Lot Coverage Limits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Maximum lot coverage
65% in the RB Rural Business District
Governing section
Zoning Ordinance Section 5E.5(e)
Minimum lot size
40,000 sq. ft. in the RB District
Enforcing office
Zoning Administrator, Permits & Inspections
Misdemeanor fine
Up to $1,000 per day, Section 26.1
Permit review time
60 days or deemed approved, Sec. 24.2(e)

Summary

Washington County's Rural Business (RB) zoning district caps lot coverage at 65 percent under Zoning Ordinance Section 5E.5(e). The RB floating zone applies once the Planning Commission rezones an Agricultural Rural, Environmental Conservation, Preservation, or Rural Village parcel for roadside commercial use, and the Zoning Administrator enforces the cap through the zoning permit process before construction begins.

These county ordinances apply to unincorporated areas of Washington County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

Section 5E.5 Bulk Regulations:

(a) Lot Size: Minimum 40,000 Sq. Ft.

(b) Front Yard Building Setback: 40 Feet from a Minor Collector or Local Public Road Right of Way; 50 feet from a Major Collector or Arterial Public Road Right of Way

(c) Side and Rear Yard Building Setbacks: 50 Feet from a property zoned for or occupied by a Residential Land Use; 25 Feet from a property zoned for or occupied by a Non-Residential Land Use.

(d) Structure Height: 35 Feet

(e) Lot Coverage: Maximum 65 %

Full Breakdown

Article 5E of the Washington County Zoning Ordinance governs the "RB" Rural Business District, a floating zone the County Commissioners create only through a rezoning case applied to land already zoned Agricultural Rural (A(R)), Environmental Conservation (EC), Preservation (P), or Rural Village (RV). 5, "Bulk Regulations," sets the district's development envelope: a 40,000-square-foot minimum lot, a 40-foot front setback from a minor collector or local road (50 feet from a major collector or arterial), 50-foot side and rear setbacks from residential land and 25 feet from non-residential land, a 35-foot height limit, and, at subsection (e), a maximum lot coverage of 65 percent.

That 65 percent ceiling covers buildings, parking, and paved surfaces on the parcel and cannot be waived administratively. 2 requires the owner to obtain a zoning permit from the Zoning Administrator; the application must include scaled plans showing lot dimensions and the location and size of proposed and existing buildings, plus the required filing fee, and the Administrator must approve or disapprove within 60 days or the permit is deemed approved by default. Article 5E was renumbered from the former RB-N District (Article 5F) effective September 1, 2015 under RZ-14-002/ORD-2015-20.

The RB District cannot be approved for a parcel unless the Planning Commission finds it lies outside a designated growth area, has safe road access meeting the county's road-adequacy policy, can handle onsite sewage and stormwater, and is compatible with surrounding agricultural, historic, or residential uses.

Violations & Fines

Building beyond the 65 percent lot coverage cap without an approved zoning permit is a misdemeanor under Section 26.1, carrying a fine of up to $1,000, with each day the excess coverage continues charged as a separate offense. The county also issues civil citations under Section 26.2.1 through a zoning official in the Permits and Inspections Department, and the Zoning Administrator can order discontinuance of the illegal use or removal of the illegal structure by written notice sent certified mail. The County Commissioners or Planning Commission may also seek an injunction under Section 26.2 to compel compliance.

Frequently Asked Questions

What is the maximum lot coverage allowed in Washington County's RB District?
Section 5E.5(e) of the Zoning Ordinance limits total lot coverage in the RB Rural Business District to 65 percent of the parcel, covering buildings, parking areas, and other paved surfaces, alongside the district's other bulk standards: a 40,000-square-foot minimum lot, 35-foot height limit, and setbacks of 25 to 50 feet from adjoining property.
Do I need a permit before building up to the lot coverage limit?
Yes. Section 24.2 requires a zoning permit from the Zoning Administrator before any building or land use covered by Article 5E is created, changed, or enlarged, and the Administrator will not approve an application that would push coverage past the 65 percent standard in Section 5E.5(e).
What happens if a property exceeds the lot coverage limit?
Exceeding the cap is a misdemeanor under Section 26.1, punishable by a fine of up to $1,000, with each day of continued violation treated as a separate offense. The Zoning Administrator can also send certified-mail notice ordering the owner to remove the illegal construction or discontinue the illegal use.
Does the 65% lot coverage limit apply county-wide?
No. It applies specifically to land rezoned into the RB Rural Business District under Article 5E. Other Washington County zoning districts, such as the Special Economic Development District under Section 19C.7, carry their own separate coverage caps, so the limit depends on the parcel's actual zoning classification.

Sources & Official References

Other rules in Washington County

All Washington County rules

Compare Washington County to another location·View the Maryland building setbacks & zoning overview

Get notified when Lot Coverage Limits in Washington County, MD changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.