Skip to main content
CityRuleLookup

Douglas County, NE Building Setbacks & Zoning: Lot Coverage Limits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified August 2026

Key Facts

Building coverage cap
40% in R-1 district
Impervious coverage cap
50% in R-1 district
Enforced by
Douglas County Zoning Coordinator
Penalty
Class III misdemeanor per violation
Scope
Unincorporated county only, not Omaha

Summary

Unincorporated Douglas County caps R-1 residential lots at 40% building coverage and 50% impervious surface coverage under the county's Zoning Regulations Table 4.3, a stormwater standard enforced by the Zoning Coordinator.

City-specific rules exist: Omaha has its own lot coverage limits rules that differ from Douglas County's county-level regulations. If you live in Omaha, check the city-specific page instead.

Regulator

1-Family Detached

1-Family Attached

Maximum Building Coverage

40%

40%

Maximum Impervious Coverage

50%

50%

Maximum Amount of Total N/A

N/A

Parking Located in Street

Yard

Other Permitted Uses 40% 50%

Setbacks may be adjusted to allow for lot clustering and in order to comply with the overall intent of Conservation Development. Notes:

1. Single-Family Attached Development: Single-family attached development requires site plan approval.

2. Subdivision of property for residential use is not allowed in the one half mile buffer zone around the waste monofill site at the Douglas County RDF Landfill site, the industrial waste monofill site located south of the Douglas County RDF Landfill site permitted by Special Page 34 of 54

Use Permit issued to Waste Management, and the Pheasant Point Landfill.

3. Residential accessory building coverage up to 20% of the rear yard.

B. Additional Requirements

All new subdivisions and lots must comply with the Conservation Development regulations contained herein.

Source: Omaha Muni Code Ch. 55View official code

Full Breakdown

In the unincorporated area of Douglas County, the R-1 Urban Residential Low-Density District limits new development to 40% building coverage and 50% impervious surface coverage: the share of a lot covered by structures, driveways, parking, and other surfaces that block stormwater infiltration, per Zoning Regulations § 4.14, Table 4.3. Building permits are checked against these limits before issuance. Coverage caps vary by district: AG and RR carry no impervious limit, while the ID Industrial District allows up to 90%. These rules apply only outside Omaha, Bennington, Valley, Waterloo, and Ralston, which enforce their own municipal codes.

Violations & Fines

Building without a permit or exceeding coverage limits is a zoning violation; the Zoning Coordinator orders correction, and violators face a Class III misdemeanor, with each 24-hour period a separate offense (§ 13.12).

Frequently Asked Questions

Does this limit apply inside Omaha?
No. Omaha, Bennington, Valley, Waterloo, and Ralston have their own municipal zoning codes; this limit governs only unincorporated Douglas County.
What counts toward impervious coverage?
Buildings and any surface that blocks water from soaking into the ground, including driveways, porches, and parking lots, per Zoning Regulations § 4.11(G).
Is the limit the same in every zoning district?
No. AG and RR districts have no impervious cap, R-1 is capped at 50%, and the ID Industrial District allows up to 90%.

Sources & Official References

Other rules in Douglas County

All Douglas County rules

Compare Douglas County to another location·View the Nebraska building setbacks & zoning overview

Get notified when Lot Coverage Limits in Douglas County, NE changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Lot Coverage Limits in Cities Across Douglas County