Skip to main content
CityRuleLookup

Midwest City, OK Building Setbacks & Zoning: Setback Rules (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Front setback, A-1/R-35
30 feet
Front setback, R-MH-1/R-MH-2
20 feet
Side setback, adjacent to lot
as low as 7 feet
Rear setback formula
20 ft or 20% of lot depth
Governing table
Appendix A, Table 3.2-1

Summary

Midwest City's zoning ordinance sets minimum front, side, and rear building setbacks for every residential district, ranging from a 30-foot front setback in the low-density A-1 district down to 20 feet in the R-MH-1 and R-MH-2 manufactured-home districts.

Minimum Front Setback 30' 30' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 25' 20' 20' ... Minimum Rear Setback 20' or 20% of Lot Depth, whichever is smaller ... 15' 10' ... 15' 10' 10' 10'

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 21).

Full Breakdown

Appendix A (Zoning Regulations) Table 3.2-1 sets minimum yard setbacks for every residential zoning district, from the half-acre A-1 agricultural district down through the R-MH-1 and R-MH-2 manufactured-home districts. Front setbacks run from 30 feet in A-1 and R-35 down to 20 feet in R-MH-1 and R-MH-2; side setbacks adjacent to an interior lot line run as low as 7 feet in most districts, with a flat 15 feet wherever a side lot line instead adjoins a street; rear setbacks are 20 feet or 20% of lot depth, whichever is smaller, dropping to 15 or 10 feet in the manufactured-home and higher-density multifamily districts. A Planned Unit Development or Simplified PUD can modify these figures through its adopted master plan under Sections 2.25 and 2.26.

Violations & Fines

Violating any zoning provision, including a setback, is a municipal offense punishable by a fine up to $100 per day under § 7.10.1, plus city action to abate or restrain the violation.

Frequently Asked Questions

What is the minimum front setback in Midwest City?
Midwest City sets the front setback by zoning district: 30 feet in A-1 and R-35, 25 feet in most residential districts, and 20 feet in the R-MH-1 and R-MH-2 manufactured-home districts.
Does this setback table apply outside Midwest City limits?
No. Table 3.2-1 governs only inside Midwest City limits. Oklahoma City, Del City, Choctaw, Nicoma Park, Spencer, and Tinker Air Force Base set their own separate standards nearby.
Can a builder get a reduced setback approved?
Yes, through a Planned Unit Development or Simplified PUD master plan approved by the City Council, which can modify standard setbacks under Sections 2.25 and 2.26 of the Zoning Ordinance.

Sources & Official References

Other rules in Midwest City

All Midwest City rules

Compare Midwest City to another location·View the Oklahoma building setbacks & zoning overview

Get notified when Setback Rules in Midwest City, OK changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Setback Rules in Nearby Cities

How other cities in this county handle setback rules.

Edmond, OK
Some Restrictions
Oklahoma City, OK
Some Restrictions