Yakima County, WA Building Setbacks & Zoning: Structure Height Limits (2026)
Key Facts
- SR/R-1 max height
- 35 feet
- R-2 max height
- 35 feet
- R-3 max height
- 50 feet
- Measurement rule
- Per YCC § 19.01.070
- Variance route
- Admin adjustment, YCC § 19.35.020
- Max misdemeanor penalty
- $1,000 fine / 90 days jail
Summary
Unincorporated Yakima County caps most single-family homes at 35 feet in the SR, R-1 and R-2 districts, while multi-family buildings in the R-3 district may reach 50 feet. Yakima County Code § 19.10.040(8) sets how height is measured and lists narrow exemptions for chimneys, spires and mechanical equipment.
(8) Maximum Building Height. (a) Maximum Building Height Determined by Zoning District. The maximum building height is intended to maintain building and structure heights compatible with the character and intent of the district. The height of buildings is measured in the manner defined in Section 19.01.070. The height of other structures not containing a roof is the vertical distance from the base of the structure to its highest point. Chapters 19.11 through 19.18 list the maximum building and structure heights. (b) Exceptions. Height limitations shall generally not apply to accessory projections located at least 20 feet from any adjoining lot line and that are not intended for human occupancy or storage, such as steeples or spires on places of religious assembly, elevator shaft housings, heating/cooling or mechanical systems, water towers, chimneys, belfries, cupolas, domes, smoke-stacks, flagpoles, asphalt/concrete batch plants, grain elevators, cooling towers, solar energy systems, monuments, fire house towers, elevator shafts, or outdoor theater screens, except as limited within the Airport Safety Overlay, by Section 19.18.490 Towers, by a condition of permit approval or by the Shoreline Master Program.
Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: rev 4871853; v6 updated 2026-04-21; through 04-21-2026).
Full Breakdown
070 governs how height is measured, generally from average finished grade to the highest point of the roof. 030. 020 for the Two-Family (R-2) and Multi-Family (R-3) districts, sets the same 35-foot limit for R-2 but allows 50 feet in R-3. 490, a permit condition, or the Shoreline Master Program impose a lower limit. 020(5), that the adjustment is consistent with the Comprehensive Plan and the purpose of the zoning district and district standard, and represents the minimum adjustment necessary. 010 cannot be modified through this administrative adjustment process; a variance is required instead.
Violations & Fines
Building over the district height limit without an approved adjustment is a violation processed under Yakima County Code Chapter 16B.11. Section 16B.11.050 makes a violation a misdemeanor punishable by up to a $1,000 fine or 90 days in jail, or both, with each day after written notice treated as a separate offense; the County may also pursue a civil infraction under Chapter 7.80 RCW, declare the noncompliant structure a public nuisance, withhold further permits, assess double permit fees, or record a lien to recover abatement costs.
Frequently Asked Questions
How tall can a house be in unincorporated Yakima County?
Can Yakima County approve a taller house than the zoning allows?
Are chimneys, antennas or solar panels exempt from the height limit?
What happens if I build a structure over the height limit?
Sources & Official References
Other rules in Yakima County
Compare Yakima County to another location·View the Washington building setbacks & zoning overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.