Seaside, OR Building Setbacks & Zoning: Structure Height Limits (2026)
Key Facts
- R-1 and R-2 height
- 35 feet maximum
- R-3 and Resort Residential height
- 45 feet maximum
- EFU agricultural buildings
- 40 feet; other EFU structures 35 feet
- C-2 height
- 90, 60 or 45 feet by distance from the Prom
- C-3 height
- 45 feet maximum
- Variance
- Planning Director, Section 7.020; appeal within 15 days
- Penalty
- Up to 30 days or $150.00 fine, each day separate
Summary
In Seaside's R-1 low density zone the maximum height of a structure is 35 feet. Zoning Ordinance 83-10 raises the cap to 45 feet in the R-3, Resort Residential and C-3 zones and to as much as 90 feet near the Prom in the C-2 zone, so the zoning district decides the limit.
Section 3.025 Standards. ... In the R-1 Zone the following standards shall apply: ... 6. Height Restriction: Maximum height of a structure shall not exceed 35 feet.
Full Breakdown
Section 3.025(6) of the R-1 Residential Low Density zone states that the maximum height of a structure shall not exceed 35 feet. R-1 is the single family zone, with a maximum density of five dwelling units per net acre, so 35 feet is the ceiling for a typical Seaside house on those lots.
Other residential zones in Ordinance 83-10 print their own caps. The R-2 Residential Medium Density zone and the Residential-Commercial zone also use 35 feet. The R-3 Residential High Density zone sets the maximum at 45 feet, and the Resort Residential zone sets 45 feet as well. The EFU farm zone holds structures to 35 feet but allows agricultural buildings to reach 40 feet.
The commercial zones differ again. C-1 caps structures at 35 feet. C-3 caps them at 45 feet. The C-2 Commercial Resort zone uses distance from the Prom: 90 feet for lands within 300 feet of the Prom, 60 feet for lands between Columbia and a point 300 feet from the Prom, and 45 feet between Columbia and the Necanicum River, a standard added by Ordinance 2000-1.
Article 1 defines how height is measured. Building Height is the vertical distance from the grade to the highest point of the coping of a flat roof, to the deck line of a mansard roof, or to the average height of the highest gable of a pitch or hip roof. A pitched roof is therefore measured to its average gable height, not to the ridge.
A height limit is a zone standard, so relief runs through the variance process. Section 7.020 lets the Planning Director authorize a variance where special and unusual circumstances make strict application an undue or unnecessary hardship, and Section 10.037 allows an appeal to the Planning Commission within 15 days.
Violations & Fines
Section 12.010 of the Seaside Zoning Ordinance punishes a violation, on conviction, by imprisonment for not more than thirty days, a fine of not more than $150.00, or both, and each day the violation continues is a separate offense. Under Section 12.020 an over-height structure is a nuisance the City can enjoin or abate, and Section 10.020 bars the Building Official from issuing a permit for a structure that does not conform.
Frequently Asked Questions
How tall can a house be in Seaside's R-1 zone?
How does Seaside measure building height?
What are the height limits near the Prom in Seaside?
Can a Seaside owner ask for a taller building than the zone allows?
Sources & Official References
Other rules in Seaside
Compare Seaside to another location·View the Oregon building setbacks & zoning overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.