Taylor, TX Building Setbacks & Zoning: Structure Height Limits (2026)

The Taylor Made Land Development Code, adopted by Ordinance 2024-41 and revised September 12, 2024, replaced Taylor's older zoning height rules with a place-type system. 5 sets the development standards for the P3 - Neighborhood place type, the code's primary residential district, and its Lots table caps STORIES (MAXIMUM) at three stories, alongside a 60 percent maximum lot coverage and a five- to twenty-foot build-to-line range. 5 place types, Rural, Rural Commercial and Large Lot, are also capped at three stories, and the P5 Urban Center place type downtown allows up to five.

1 provides that stories may not exceed 14 feet in height from the finished floor to the finished ceiling, with an exception for a first-floor commercial space, which must run at least 11 feet and may run up to 25 feet. Applied together on a P3 Neighborhood lot, the two rules mean a three-story house is capped near 42 feet of story height before roof framing, since each of the three stories is limited to 14 feet. Because the LDC took effect in 2024, it supersedes any height figures a homeowner might find in an older zoning summary; Development Services administers the place-type standards and can confirm the applicable place type for a specific lot before a building permit is issued.