Taylor, TX Fence Regulations: Height Limits (2026)
Key Facts
- 1st layer max height
- 4 feet
- 2nd layer max height
- 6 feet
- 3rd layer max height
- 8 feet
- Sight-triangle screening cap
- 18 inches
- Front yard fence
- Must be 50% see-through
- Barbed wire
- Banned under 2 acres
- Max fine
- $2,000 per offense
Summary
Taylor's 2024 Land Development Code caps fence height by lot layer under Section 5.8.5.4: four feet maximum in the first layer nearest the street, six feet in the second layer, and eight feet in the third layer at the rear. Screening within corner sight triangles is separately capped at 18 inches.
The maximum height of any shrubs, ornamental plants, boulders, walls, or ... other such materials within designated sight distances and traffic safety triangles is 18 inches. ... Fences are required to meet the site triangle standards in Section 5.6 Landscaping Standards. ... Fence heights are regulated as by layer as follows. A four foot max height in the 1st layer. A six foot max height in the second layer and an eight foot max height in the third layer.
Official source re-checked September 8, 2026: the cited page had not changed since it was quoted.
Full Breakdown
8, Fencing Standards, which applies citywide within Taylor's city limits. 4 sets the maximum height by the three lot layers used throughout the LDC's place-type system: four feet in the first layer closest to the street, six feet in the second layer, and eight feet in the third layer, which typically holds the rear yard. 1 layers on material rules: permitted materials include wood, stone, rock, concrete block, masonry brick, decorative wrought iron, chain link and welded wire, while plywood, paper, plastic, fiberglass panels, chicken wire, fabric, and sheet, roll or corrugated metal are prohibited outright.
Front-yard fences must be at least 50 percent see-through, meaning wrought iron or picket-style construction, and barbed wire is barred on residential lots under two acres. Apartment complexes facing a local or collector street may only use wrought iron or similar material in front and side setbacks. 2, so a taller fence segment cannot block a driver's view at an intersection. 2. Swimming pools require their own fence or barrier with a self-latching gate meeting the 2018 International Swimming Pool and Spa Code.
Violations & Fines
Fences that exceed the layer height caps, use prohibited materials, or block a corner sight triangle are Land Development Code violations enforced by the Development Services Director. Under Section 1.14.3.1, a zoning-related LDC violation can draw a fine up to $2,000.00 per offense, and each day the noncompliant fence remains standing counts as a separate offense in Taylor Municipal Court.
Frequently Asked Questions
How tall can a fence be in Taylor's front yard?
Can I build an 8-foot fence in my backyard?
Does a corner lot fence have extra height limits?
What fence materials are banned in Taylor?
Sources & Official References
Other rules in Taylor
How Taylor compares: Cities That Allow the Tallest Residential Fences·Texas rules heatmap·Compare Taylor to another location·View the Texas fence regulations overview
See something wrong?
Help us keep this page accurate. If you notice an error or outdated information, let us know.
Height Limits in Nearby Cities
How other cities in Williamson County handle height limits.