Building Setbacks & Zoning in Apple Valley, MN (2026)
3 verified building setbacks & zoning rules for Apple Valley, Minnesota, sourced directly from the municipal code and official government pages.
Verified from official government sources
Setback Rules
In the City of Apple Valley, Minnesota, the R-1 row of Chapter 155 Appendix A prints a 30-foot front setback, 20 feet on an interior side, 30 feet on a corner side and 30 feet in the rear. Section 155.333 lets eaves and similar projections extend 30 inches into a required yard but never within three feet of an R-district lot line.
Yard Setback Rules in Apple Valley, Minnesota
Some RestrictionsApple Valley Code of Ordinances § 155.333; Chapter 155, Appendix A
(C) The following shall not be considered as encroachments on yard area or setback requirements: ... (a) Chimneys, flues, sills, pilasters, lintels, ornamental features, cornices, eaves, bays, gutters and other similar projections, provided they do not extend more than 30 inches into the required setback area and in no instance in the R districts nearer than three feet from a lot line. ... (D) ...
Structure Height Limits
In the City of Apple Valley, Minnesota, the R-1 and R-2 one-family districts print a 35-foot maximum height in Chapter 155 Appendix A, and § 155.334 lets antennas, belfries, church spires, cooling towers and elevator penthouses exceed the limit by 50%. Flagpoles top out at 100 feet, and anything taller needs a City Council variance.
Building Height Limits in Apple Valley, Minnesota
Some RestrictionsApple Valley Code of Ordinances § 155.334; Chapter 155, Appendix A
(A) Height limitations as set forth in this section may be increased by 50% when applied to the following: ... (B) Height limitation for flagpoles in any district shall be 100 feet. (C) Heights in excess thereof for the purposes may be permitted only by a variance granted by resolution of the City Council determining that the structures would not be dangerous and would not adversely affect the ...
Lot Coverage Limits
In the City of Apple Valley, Minnesota, § 155.350(B) caps impervious surface on one-family detached and twinhome lots at 35% for lots of 10,000 sq. ft. or greater, rising to 40%, 45% and 50% as lots get smaller. The City can allow up to an additional 5% with good cause and an approved on-site stormwater facility.
Impervious Surface Limits in Apple Valley, Minnesota
Some RestrictionsApple Valley Code of Ordinances § 155.350(B), (C)
(B) The maximum impervious surface area on a lot or parcel with a ... detached dwelling (house) or lots with two-family attached dwellings (twinhome) shall not exceed the following coverage: Lot Size1 Maximum Impervious Coverage Allowed 10,000 sq. ft. or greater 35% 9,999 sq. ft. - 7,500 sq. ft. 40% 7,499 sq. ft. - 6,000 sq. ft. 45% Less than 6,000 sq. ft. 50% ... (C) The maximum impervious sur...
Looking for Dakota County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Apple Valley city rules.
Building Setbacks & Zoning in Dakota County →