Skip to main content
CityRuleLookup

Building Setbacks & Zoning in Indio, CA (2026)

3 verified building setbacks & zoning rules for Indio, California, sourced directly from the municipal code and official government pages.

Verified from official government sources

Setback Rules

Indio measures setbacks from the property or easement line to the nearest wall, with zone-specific front, side, and rear minimums set in the Unified Development Code's zone tables.

Indio Yard Setback Minimums by Zone

Some Restrictions

Indio Unified Development Code § 3.02.03(A)-(B)

Required setbacks shall be measured as the minimum horizontal distance from the nearest point of the front, side, or rear property line of the parcel to the nearest wall of the structure (see Figure 3.02.03-1. Measurement of Setbacks), with the following exceptions: a. When a property abuts a street with a required dedication or easement, the required setback shall be measured from the dedic...

Structure Height Limits

Indio caps single-family building height at 25 feet or two stories, whichever is less, in the DE-1 estate and MH mobile-home zones, and at 30 feet in the standard SN-4 and SN-8 single-family zones, with extra height for architectural features.

Indio Residential Building Height Limits By Zone

Some Restrictions

Indio Unified Development Code § 2.02.03 (Table 2.02.03-1)

Maximum Height (ft) - Primary Building ... 25 or 2 stories, whichever is less / 25/2 stories / 30 / 30 / 25 or 2 stories, whichever is less ... Projects must comply with both stories and overall height maximums. See Section 3.01.03 (Measuring Heights)

Lot Coverage Limits

Indio limits total building footprint to 30% of lot area in the large-lot DE-1 zone, rising through 40%, 50%, and 60% in the DET-3, SN-4, and SN-8 zones to 70% in the MH mobile-home zone.

Indio Maximum Lot Coverage By Residential Zone

Some Restrictions

Indio Unified Development Code § 2.02.03 (Table 2.02.03-1); § 3.01.05(C)

Maximum Lot Coverage (% of lot) ... 30 / 40 / 50 / 60 / 70 ... Lot coverage is the ratio of the total footprint area of all structures on a lot to the net lot area, typically expressed as a percentage. The footprints of all principal and accessory structures, including garages, carports, covered patios, and roofed porches, shall be summed to calculate lot coverage.

Looking for Riverside County county-wide rules?

County ordinances apply to unincorporated areas and may supplement Indio city rules.

Building Setbacks & Zoning in Riverside County