Outdoor Lighting in Meriden, CT (2026)
2 verified outdoor lighting rules for Meriden, Connecticut, sourced directly from the municipal code and official government pages.
Verified from official government sources
Light Trespass & Shielding
Meriden's zoning code sets a hard cap on light spilling from manufacturing and industrial uses onto neighboring homes. Under the Performance Standards of Chapter 213, any M-1 through M-4 use cannot let direct or indirect illumination exceed 0.5 footcandle where it lands in a residential zone, and heat from the same source cannot be felt off the lot either.
Meriden caps industrial glare into home yards
Some RestrictionsMeriden Code § 213-54A, B(4)
It is the intent of this section to ensure that research, manufacturing and related activities in the M-1, M-2, M-3 and M-4 Districts are established and maintained in a manner not detrimental to the public health, safety and welfare and in a manner beneficial to the use, enjoyment and value of neighboring properties. ... Glare and heat. All uses shall be conducted so that direct or indirect il...
Billboard Lighting
Meriden caps how bright a digital billboard can glow: under Section 213-56E(2)(f)[3], the display cannot exceed 0.3 footcandle above ambient light at set distances tied to sign size, measured at a 90-degree angle to the sign face, and the billboard must freeze or shut off automatically if it malfunctions.
Meriden Digital Billboard Brightness Limit
Some RestrictionsMeriden Code § 213-56E(2)(f)[3]-[4], § 213-71(2)(c)
[3] Brightness: [a] No digital billboard may operate at brightness levels of more than 0.3 footcandle above ambient light for the following distances from the sign face based on the size of the sign: Distance (feet) Sign Size (square feet) 100 242 150 378 200 672 [b] The brightness measurement shall be made with the light meter or similar device positioned at a ninety-degree angle to the orient...