Fence Regulations in Parker, TX (2026)
4 verified fence regulations for Parker, Texas, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
Perimeter fencing in Parker's single-family district cannot exceed six feet under City Code § 156.32(H)(1)(a), and most fences must be open construction with at least half of each panel unobstructed. Corner lots carry an added visibility rule under § 156.37(B) protecting sightlines at intersections.
Parker Fence Height and Corner Visibility Rules
Some RestrictionsParker Code of Ordinances § 156.32(H)(1)
(1) General restrictions. (a) All perimeter fencing shall not exceed six feet in height. All fences shall be of open construction and not solid or near-solid fabric or surfacing, except for parcels of land that are side or rear adjacent to the following roads: Parker Road, Dillehay Drive (FM 2551), and Hogge Drive (FM 2551) on which a solid or near-solid fence constructed of wood, masonry, or w...
Fence Permit Requirements
Parker does not require a standalone permit for an ordinary residential fence, but City Code § 156.32(H)(4) requires every completed fence to be inspected and approved by the Building Official. Fences enclosing a swimming pool are treated differently: § 156.32(H)(7) requires a building permit for the pool and its safety fencing.
Parker Fence Inspection and Pool-Fence Permit Rule
Light RestrictionsParker Code of Ordinances § 156.32(H)(4), (H)(7)
(4) Inspection and maintenance. When any fence is completed, it must be inspected. The Building Inspection Department shall be notified upon completion of the fence. The Building Official will approve the fence if it complies with the provisions of this section, or it will be rejected. ... (7) Swimming pool enclosures. A building permit is required for the construction of all swimming pools, an...
Retaining Walls
Parker's subdivision rules require every residential lot to be graded and platted with topography and drainage in mind, and specifically direct developers to minimize the use of retaining walls rather than relying on them to manage grade changes. A grading plan showing existing and proposed contours at half-foot intervals must go to the City Engineer for lot design approval.
Parker, TX Retaining Wall Grading Rule
Light RestrictionsParker Code of Ordinances § 155.050(F)
(F) Lot grading and drainage. Drainage for lots shall be designed in accordance with the city’s requirements. Lots shall be laid out so as to provide positive drainage away from all buildings, and individual lot drainage shall be coordinated with the general storm drainage pattern for the area. Drainage shall be designed so as to avoid concentration of storm drainage water from each lot to ad...
Material Restrictions
Parker's fence code lists exactly what a residential fence may be built from under City Code § 156.32(H)(5): wood, concrete, masonry, chain link, wrought iron, metal tubing, vinyl, fiberglass composite or barbed wire. Razor ribbon, sheet metal, corrugated steel and plywood are all barred, and no fence may be electrically charged.
Parker Fence Material Restrictions
Some RestrictionsParker Code of Ordinances § 156.32(H)(5)-(6)
(5) Materials. (a) Permitted materials. Materials permitted are wood, concrete, masonry, chain link, wrought iron, metal tubing, vinyl, fiberglass composite, barbed wire, or other materials approved by the Building Official for exterior exposure as fence material. (b) Prohibited materials. Materials prohibited are razor ribbon, sheet metal, corrugated steel and fiberglass panel, plywood, or any...
Looking for Collin County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Parker city rules.
Fence Regulations in Collin County →