Fence Regulations in Pasco, WA (2026)
7 verified fence regulations for Pasco, Washington, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
In Pasco, fences, walls and hedges in the front yard of residentially, retail-business and office-zoned lots are limited to 3.5 feet, with an extra 1.5 feet of 85% transparent material allowed up to 5 feet. Side, rear and secondary-front yards allow up to 6 feet.
Pasco Fence Height Limits
Some RestrictionsPermit Requirements
Pasco does not require a building permit for fences under 7 feet tall, but those fences must still meet the city's zoning design standards in PMC 25.180.050. Fences taller than 7 feet require a building permit, and retaining walls over 4 feet require one separately.
Pasco Fence Permits
Few RestrictionsNeighbor Fence Rules
Pasco's code does not set residential cost-sharing rules for shared boundary fences. Washington's partition-fence statute (Ch. 16.60 RCW) is part of the Animals and Livestock title and applies mainly to agricultural enclosures, so most disputes between neighbors are private property-line and civil matters.
Pasco Fence Neighbor Rules
Few RestrictionsRetaining Walls
In Pasco, retaining walls under 4 feet tall are exempt from a building permit; walls over 4 feet (measured from the bottom of the footing to the top) or any wall supporting a surcharge require a permit. A retaining wall can also affect how fence height is measured along a common lot line.
Pasco Retaining Walls
Some RestrictionsFence Requirements
Pasco fences must meet PMC 25.180.050: front-yard height of 3.5 ft (5 ft with a transparent top), 6 ft in side/rear yards, a 3-foot vision-clearance limit in the intersection sight triangle, a minimum 3-foot gate into at least one side yard, and structural posts/rails hidden from the street in front yards.
Pasco Fence Requirements
Some RestrictionsMaterial Restrictions
PMC 25.180.050 bans fences made of tires, pallets, bed springs, multi-colored materials, tarps, plastic sheets, corrugated sheet metal (except industrial districts), wheel rims, and similar non-fencing materials. Hog wire, chicken wire, field fence and similar wire mesh are not allowed in residential or commercial zones.
Pasco Fence Material Restrictions
Some RestrictionsApproved Materials
Pasco allows traditional fencing materials (wood, masonry, wrought iron, vinyl) under PMC 25.180.050 but bans non-fencing junk materials and most wire mesh in residential and commercial zones. Front-yard fences over 3.5 ft must be 85% transparent, and the I-182 overlay requires masonry block.