Fence Regulations in Perris, CA (2026)
7 verified fence regulations for Perris, California, sourced directly from the municipal code and official government pages.
Verified from official government sources
Height Limits
The City of Perris caps residential walls, fences, and hedges at 6 feet in interior side and rear yards. In the front yard, only 3 feet of solid fencing is allowed; heights to 5 feet are permitted if the portion above 3 feet is at least 50 percent open. Commercial fencing may reach 12 feet.
Perris Fence and Wall Height Limits
Some RestrictionsPermit Requirements
The City of Perris Building Department reviews fence and wall work for compliance with zoning height limits and structural standards. Block (masonry) walls require a building permit and footing, rebar, and final inspections. The city publishes a standard block-wall design and a site-plan example through Development Services at 135 N. D Street.
Perris Fence and Wall Permits
Some RestrictionsNeighbor Fence Rules
Perris zoning sets fence heights, but shared boundary fences between neighbors are governed by California Civil Code 841, the 'Good Neighbor Fence' law. Adjoining owners are presumed to share equally in the reasonable cost of building, maintaining, or replacing a dividing fence, and 30 days' written notice is required before incurring costs.
Perris Shared and Boundary Fence Rules
Some RestrictionsRetaining Walls
The City of Perris publishes a standard plan for a block wall atop a 2-foot retaining wall and requires footing, rebar, and final inspections for masonry work. Under the California Building Code the city enforces, retaining walls over 4 feet (measured from the bottom of the footing) require a building permit.
Perris Retaining Wall Rules
Some RestrictionsFence Requirements
Beyond height, Perris requires fences to preserve corner visibility and meet design standards. Zoning Code Section 19.02.050 bars fences, walls, hedges, and retaining walls from the corner sight triangle (15-foot sides) between 42 inches and 8 feet in height. Multi-family developments must be fully fenced and gated around the perimeter.
Perris Fence Requirements and Corner Visibility
Some RestrictionsMaterial Restrictions
Perris restricts fence and wall materials in residential zones. Section 19.02.040 prohibits barbed wire, plain wire, corrugated metal, electrically charged fences, exposed plain PCC concrete, plywood (including T-111), and chain link. Approved materials include masonry, stone, brick, slump block, stucco, wood, and block/wrought-iron combinations.
Perris Fence Material Restrictions
Heavy RestrictionsApproved Materials
Perris specifies which fence and wall materials are acceptable. Section 19.02.040 permits split-face masonry, stone and stone veneer, brick, slump block, stucco, wood, and block/wrought-iron combinations in residential zones. Commercial and public-facing walls must use decorative materials such as block or wrought iron.
Perris Approved Fence and Wall Materials
Some RestrictionsLooking for Riverside County county-wide rules?
County ordinances apply to unincorporated areas and may supplement Perris city rules.
Fence Regulations in Riverside County →